เครื่องวิเคราะห์ธาตุด้วยเปลวไฟ รุ่น: BWB-SYN Fuels

This powerful and growing global industry now has the attending facilities for Synthetic Fuels or Bio-Fuels production. For this derivative product BWB Technologies offers a hybridized Flame Photometer we have named Syn Fuels.

​

The BWB SYN FUELS Flame Photometer is the first and only 4 channel flame photometer with simultaneous detection and display of all 4 elements. A high quality and high performance instrument, the BWB SYN FUELS employs modern technology to improve both accuracy and stability while significantly reducing analysis time.

​

The fluid handling sections of the BWB SYN FUELS Flame Photometer

incorporate proprietary engineered thermoplastics that are highly chemically resistant to withstand the solvents encountered in Synthetic Fuels production facilities.

​

The majority of our Global clients purchases a BWB Sugar FES for the

beet or cane refining plant and the Syn Fuels FES for the bio-conversion plant site.

​

For non Sugar processors embracing Syn Fuels, the BWB XP is typically the BWB FES of interest during the bio-conversion processes.

Technical Data

Sample rate

3.5 – 7ml/min

Tubing materials

PTFE and Teflon

Required desk space for Instrument

50cm (H) x 45cm (W) x 45cm (D)*

For Safety reasons the Flame photometer requires 1m of unobstructed space above to allow dissipation of heat from the chimney.

Instrument size

Syn Fuels Flame Photometer

51cm (H) x 38cm (W) x 41cm (D)

(20in x 14in x 16in)

Shipping

62cm (H) x 55cm (W) x 47cm (D)

(24in x 22in x 19in)

Weight

Syn Fuels Flame Photometer – 15.3kg

Shipping – 25kg

​

Optimal range

Single point calibration

Na 0.1 – 60ppm

K 0.05 – 100ppm

Li 0.05 – 50ppm

Ca 1.0 – 100ppm

Multi Point Calibration

Na 0.1 – 1000ppm

K 0.05 – 1000ppm

Li 0.05 – 1000ppm

Ca 1.0 – 1000ppm

Reproducibility

<1% Coefficient of variability for 20 consecutive samples over ten minutes at concentrations of 100ppm or less. (After instrument stabilisation).

Specificity

Na/K/Li = <0.5% to each other when equal in concentration at <100ppm

Limit of detection (LOD) and

limit of quantification (LOQ) displayed

LOD LOQ

Na – 0.03ppm Na – 0.1ppm

K – 0.02ppm K – 0.05ppm

Li – 0.02ppm Li – 0.05ppm

Ca – 0.3ppm Ca – 1ppm

Time to stability

Less than 15 seconds after sample

is introduced into the flame

Ions measured

Simultaneous measurement of Na, K, Li, Ca

Interfaces

USB

0-2.5 volt output (based on sample concentration linked to element of users choice)

Optional 4-20mA output in place of the above

Optional integrated printer

.CSV and .PDF generated reports and files via FP-PC software

Collection Cup fitted as standard allowing live reading

Recommended minimum warm up

time based on ambient temperature

21°C – 40 minutes

Power requirements

100V – 250V AC at 50 or 60Hz

Fuel requirement

Propane, Butane or Natural Gas*

regulated to 19Bar. Flow rate of 0.4l/min

• with modifications. BWB Technologies recommends either Propane or Butane for optimum results.

Readout

LCD, four line, alpha numeric, back lit.