เครื่องอบแห้งแบบพ่นฝอย (Spray Dryer) ADL311S-A

ADL311SA: For aqueous soluble samples (When organic solvent is used, a GAS410 organic solvent recovery unit is required.)

• Easy setup, easy operation
• Suitable for heat sensitive samples. High heat is not directly applied to dry, fine powder
• Obtain contaminant free fine powder which is not oxidized and contains minimal moisture
• Direct drying of solution or solution liquid into fine powder. No pre- or post processes such as filtration, separation, or pulverization required
• Safe and explosion free working is guaranteed in combination with GAS410 due to oxygen & pressure control
• Organic solvents are recovered in a closed loop to protect the environment to enable minimized pollution
• Easy operation with one-touch detachable mechanism for drying chamber and cyclone
• An arm jack is equipped as standard for easy installation and removal of glassware attachments
• A service outlet (max.2A) and a sample stand are equipped as standard for connecting a magnetic mixer for stirring suspended liquid samples
• Unique peristaltic pump, nozzle cooling mechanism, pulse jet mechanism and a nozzle knocker for stable spray drying
• ADL311SA is highly mobile on wheels, or usable with shorter height as a bench top unit by removing the movable caster

Catalogue (opens in a new tab)

Product Parameters

• Item Code — 212738
• Model — ADL311S-A
• Temp. adjusting unit setting range — 40 to 220°C (inlet temperature), 0 to 60°C (Outlet temperature)
• Temperature adjusting accuracy — Inlet temperature±1°C
• Drying air amount adjusting range — 0 to 0.7m3/min
• Spray air pressure adjusting range — 0 to 0.3MPa
• Liquid sending pump flow rate range — 0 to 26 mL/min
• Spray air line washing function — Spraying at the nozzle tip, Manual pulse jet system
• External output — Inlet temperature, Outlet temperature, Temperature outlet (4-20 mA)
• Temperature adjusting device — PID digital temperature adjusting device
• Touch panel — Blower, Heater, Liquid sending pump, Pulse jet switch, error display
• Control select switch — Inlet temperature, Outlet temperature control switch(Outlet temperature control is conditional)
• Temperature sensor — K-thermocouple
• Heater — 2.0kW (at200V) to 2.88kW (at240V)
• Liquid sending — Fixed amount peristaltic pump
• Spraying air pump — For water soluble samples air compressor is used (sold separately). For organic solvent samples the integrated compressor in GAS410 is used (No separate air compressor required).
• Service outlet — For stirrer: AC100V, MAX. 2A
• Suction blower — Bypass blower
• Filter — Suction filter, Exhaust filter
• Recovery of solvent — Solvent recovery unit GAS410 (Sold separately) is used
• Spray nozzle cooling mechanism — Connector: nipple×2, O.D.: ø10.5mm
• Spray air connection diameter — Nipple diameter: ø7mm
• Spray air pressure — Bourdon tube: 0.3 MPa
• Exhaust connecting diameter — ø50mm
• Safety function — Inlet / Outlet temperature overheat, Sample feed reverse rotation mechanism, Over current electric leakage breaker, Nozzle connection error
• External dimensions（W×D×H mm） — 580×420×1125mm
• Power Source — AC200-AC240V 16-18A Single phase
• Weight — 80kg
• Accessories — Silicon tubes (with a stopper)×3, Exhaust duct (with one hose band)×1, Outlet temperature sensor, Spray air tube, Sample box, Static electricity removal earth, "Tetron" braided tube hose 5m (with two hose bands)