Hanna

Hanna

MX-13262

Hanna

MX-12160

• Description: TISAB calibration solution
• Package: bottle

Hanna

MX-11769

• Quantity: 100 tests

Hanna

MX-13277

• Type: titration
• Smallest Increment: 0.2 mg/L (ppm) in the 0.0-4.0 range and 1.0 mg/L in the 0.0-20.0 range

Hanna

MX-13278

• Quantity: 100 tests

Hanna

MX-13279

Hanna

MX-12664

Hanna

MX-12763

Hanna

2 รุ่นย่อย: 100 · 300

Hanna

MX-11771

• Type: titration
• Smallest Increment: 1 gpg

Hanna

MX-13287

Hanna

MX-12748

Hanna

MX-13288

Hanna

MX-12747

Hanna

MX-13289

Hanna

MX-13290

Hanna

MX-13291

Hanna

MX-13292

Hanna

MX-13293

Hanna

MX-13295

Hanna

MX-13296

Hanna

MX-12766

Hanna

MX-12698

Hanna

MX-11209

Hanna

MX-11585

Hanna

MX-12198

HI70429 Silber-Nitrat AgNO3 0.05M, 1 Liter Titrierlösung – fixfertig

Hanna

MX-12202

HI70439 Natrium-Thiosulfat 0.1M, 1 Liter Titrierlösung – fixfertig

Hanna

MX-12259

0.5M (NH 4 ) 2 SO 4 E lectrolyte solution for E lectrodes (4×30 ml)

Hanna

MX-12289

ORP standard solutions allow you to test the precision of ORP electrodes. For example, by immersing the electrode in HI 7020 solution, you should read within the 200 to 275 mV range (@20°C/68°F). If the reading is outside the indicated interval, clean and condition your ORP electrode in HANNA® pretreatment solution.

Hanna

MX-12290

Hanna

MX-11179

Hanna

MX-11185

Hanna

MX-11190

Hanna

MX-11194

Hanna

MX-12396

Cantilever stand with large steel base provides greater stability and flexibility and holds up to 3 electrodes in any position.

Hanna

MX-13252

HI70300L is a storage solution prepared with reagent grade chemicals that can be used to ensure optimum performance of your pH and ORP electrodes. It is necessary to store a pH electrode in a solution in order to keep the glass membrane of the pH electrode hydrated.

Hanna

MX-11486

HI7082 is a pH and ORP electrode fill solution that contains 3.5M KCl, which is specifically produced for double junction electrodes. The electrolyte level in refillable electrodes should be checked before performing any measurements.

Hanna

MX-11662

HI11311 SMART Single Keramik, double junction, nachfüllbare pH Electrode mit integriertem Temperature Sensor und Matchin Pin (edge) Elektroden, die mit edgeTM verwendet werden können, sind so fortgeschritten wie die edgeTM selbst : mit einem eingebauten Mikrochip.

Hanna

MX-11670

HI12300 SMART double junction pH Electrode , gel filled , PEI body , with integrated Temperature Sensor ( edge) Electrodes that can be used with Edge TM are as advanced as the edge itself TM : a built-in microchip.

Hanna

MX-11673

• Reference: Double, Ag/AgCl
• Junction/Flow Rate: Ceramic, single

Hanna

MX-12388

4-ring interchangeable probe with built-in temperature sensor, ATC and 1 m (3.3′) cable, for use with HI 9835 and HI 98360. The potentiometric method eliminates polarization and thus is the most accurate way to measure electrical conductivity in liquids.

Hanna

MX-12389

HI763100 SMART Digital conductivity electrode – 4ring , platinum with integrated Temperature Sensor ( edge) Electrodes that can be used with Edge TM are as advanced as the edge itself TM : a built-in microchip.

Hanna

MX-12360

Chloride ISE, with o-ring, to be used with HI 9829 and HI 98290 series multiparameter meters.

Hanna

MX-12361

Nitrate ISE with o-ring, to be used with HI 9829 and HI 98290 series multiparameter meters.

Hanna

MX-13097

• Reference: Single, Ag/AgCl
• Junction: Cloth

Hanna

MX-11887

Gas sensor replacement pH for Carbon Dioxide Sensor

Hanna

MX-11885

Gas sensor replacement pH for ammonia sensor HI4101

Hanna

MX-12321

Spare tester electrode, goes to HI 98129, and HI 98130 Combo multiparamter testers, HI 98127 and HI 98128 pHep ® testers, HI 98120 and HI 98121 ORP testers. Order Information: To be used with HI 98127, HI 98128, HI 98121, HI 98129 and HI 98130