ใบเสนอราคาฟรี · สินค้าของแท้ · จัดส่งทั่วไทยและต่างประเทศ
ใบเสนอราคาฟรี · สินค้าของแท้ · จัดส่งทั่วไทยและต่างประเทศ
รหัสสินค้า: MX-13089
ราคาแจ้งผ่านใบเสนอราคา เพิ่มสินค้านี้ลงในคำขอใบเสนอราคา แล้วเราจะตอบกลับพร้อมราคาและระยะเวลาส่งมอบ โดยปกติภายใน 1 วันทำการ ไม่ต้องชำระเงินออนไลน์ ไม่ต้องสมัครสมาชิก และไม่มียอดสั่งซื้อขั้นต่ำ
สะดวกคุยโดยตรง? โทร +66 99 241 5692, อีเมลหาเรา หรือ แชทผ่าน LINE.
| pH Range | -2.0 to 20.0 pH, -2.00 to 20.00 pH, -2.000 to 20.000 pH |
|---|---|
| pH Resolution | 0.1 pH, 0.01 pH, 0.001 pH |
| pH Accuracy | ±0.1 pH, ±0.01 pH, ±0.002 pH (±1 last significant digit) |
| Calibration Points | Up to 5 |
| Calibration Type | Automatic, Semiautomatic, Manual |
| Standard Buffers | Hanna and NIST (pH 1.68, 3.00, 4.01, 6.86, 7.01, 9.18, 10.01, 12.45) |
| Custom Buffers | Up to 5 |
| Custom Group | Option to select from eight standard buffers and user-defined custom buffers |
| First Calibration Point | Offset or Point (user setting) |
| Isopotential Point | -2.000 to 20.000 pH |
| mV Range | -2000.0 to 2000.0 mV |
| mV Resolution | 1 mV, 0.1 mV |
| mV Accuracy | ±0.2 mV ±1 last significant digit |
| mV Calibration | Single point offset, ±2000.0 mV |
| ISE Range | 1.0×10 ¯5 to 300.0 ppt (g/L or mg/mL) 5.0×10 ¯3 to 1.0×10 5 ppm (mg/L or µg/mL) 1.0 to 5.0×10 7 ppb (µg/L) 1.0×10 ¯7 to 10.0 M (mol/L)cont= 1.0×10 ¯4 to 1.0×10 4 mmol |
| ISE Resolution | 1, 2, 3 significant digits |
| ISE Accuracy | ±0.5% (monovalent ions), ±1% (divalent ions) |
| ISE Calibration Points | Up to 5 |
| ISE Calibration Type | All Standards, Standard Group |
| ISE Standards | 7 standard solutions available for each concentration unit |
| ISE Custom Standards | Up to 5 |
| ISE Custom Group | Up to 5 |
| Conductivity Range | 0.000 to 9.999 µS/cm, 10.00 to 99.99 µS/cm, 100.0 to 999.9 µS/cm, 1.000 to 9.999 mS/cm, 10.00 to 99.99 mS/cm, 100.0 to 1000.0 mS/cm |
| Conductivity Resolution | 0.001 µS/cm, 0.01 µS/cm, 0.1 µS/cm, 0.001 mS/cm, 0.01 mS/cm, 0.1 mS/cm |
| Conductivity Accuracy | ±1 % of reading or ±0.010 µS/cm, whichever is greater |
| Conductivity Cell Constant | 0.0500 to 200.0000 /cm |
| Conductivity Calibration Type | Automatic, Manual |
| Conductivity Calibration Points | Single, Up to 5 |
| Conductivity Calibration Solutions | 84 µS/cm, 1413 µS/cm, 5000 µS/cm, 12880 µS/cm, 80000 µS/cm, 111800 µS/cm |
| Resistivity Range | 1.0 to 99.9 Ω•cm, 100 to 999 Ω•cm, 1.00 to 9.99 KΩ•cm, 10.0 to 99.9 KΩ•cm, 100 to 999 KΩ•cm, 1.00 to 9.99 MΩ•cm, 10.0 to 100.0 MΩ•cm |
| Resistivity Resolution | 0.1 Ω•cm, 1 Ω•cm, 0.01 KΩ•cm, 0.1 KΩ•cm, 1 KΩ•cm, 0.01 MΩ•cm, 0.1 MΩ•cm |
| Resistivity Accuracy | ±1 % of reading or ±1 Ω•cm, whichever is greater |
| Total Dissolved Solids (TDS) Range | 0.000 to 9.999 ppm, 10.00 to 99.99 ppm, 100.0 to 999.9 ppm, 1.000 to 9.999 ppt, 10.00 to 99.99 ppt, 100.0 to 400.0 ppt, actual TDS (with 1.00 factor) |
| Total Dissolved Solids (TDS) Resolution | 0.001 ppm, 0.01 ppm, 0.1 ppm, 0.001 ppt, 0.01 ppt, 0.1 ppt |
| Total Dissolved Solids (TDS) Accuracy | ±1 % of reading or ±0.01 ppm, whichever is greater |
| Salinity Range | 0.00 to 42.00 PSU (Practical Salinity Scale), 0.00 to 80.00 ppt (Natural Sea Water), 0.0 to 400.0 % (Percent Scale) |
| Salinity Resolution | 0.01 PSU, 0.01 ppt, 0.1 % |
| Salinity Accuracy | ±1 % of reading |
| Salinity Calibration | 1 point, using 100 % salinity calibration solution (% scale only) |
| Temperature Range | -20.0 to 120.0 °C, -4.0 to 248.0 °F, 253.2 to 393.2 K |
| Temperature Resolution | 0.1 °C, 0.1 °F, 0.1 K |
| Temperature Accuracy | ±0.2 °C, ±0.4 °F, ±0.2 K |
| Temperature Calibration | Single point, adjustable |
| Temperature Compensation | For pH: Automatic, Manual For Conductivity: Linear, Natural, Standard, Disabled |
| Reference Temperature | For Conductivity: 5.0 to 30.0 °C (41.0 to 86.0 °F , 278.2 to 303.2 K) |
| Temperature Coefficient | For Conductivity: 0.00 to 10.00 %/°C |
| Reading Mode | Direct Direct/Autohold ISE Only: Known Addition, Known Subtraction, Analyte Addition, Analyte Subtraction Conductivity Only: Direct/USP |
| Basic View | Measurement data, Measurement profile (if enabled), Stability status |
| Simple GLP View | Basic view information For pH: pH Last calibration date, slope, offset (pH, Rel. MV - ISE Only) For Conductivity: Last calibration date and offset |
| Full GLP View | Simple GLP Information, Calibration point details (pH, ISE, Conductivity, and Salinity) |
| Graph View | Basic view information, measurement versus time graph |
| Table View | Basic view information, Table with measurements updated every second |
| Reading Stability Criteria | Accurate, Medium, Fast |
| Reading Sampling Rate | 1000 ms |
| Logging Type | Automatic, Manual, Autohold |
| Logging Number of Records | 50,000 maximum per file and stores at least 1,000,000 data points per user |
| Logging Automatic Interval | 1, 2, 5, 10, 30 seconds and 1, 2, 5, 10, 15, 30, 60, 120, 150, 180 minutes |
| Logging Sample ID | Incremental Mode, Manual |
| Logging Export Option | .CSV file format |
| Connectivity USB-A | 2 ports keyboard and/or printer input USB Flash Drive |
| Connectivity USB-C | 1 port PC Connectivity and USB-C Type Flash Drive |
| Connectivity Wi-Fi & Ethernet | FTP, Web Server (Log transfer and download), Email |
| Connectivity RS232 | Connecting peripherals |
| Calibration Reminder | Daily (0 minutes to 23 hours and 59 minutes), Periodic (1 minute to 30 Days, 23 hours and 59 minutes), or Disabled |
| Users | Up to 9 users and the default administrator account |
| Power Supply | DC adapter 100-240 VAC to 24 VDC 2A |
| Environment | 0 to 50 °C / 32 to 122 °F / 273 to 323 K maximum 95 % RH non-condensing |
| Dimensions | 205 x 160 x 77 mm (8.0 x 6.2 x 3.0 ") |
| Weight | 8.05 lbs |
Hanna
MX-12011
