We use cookies to improve this site and see how it is used. Cookies Policy

Skip to content
ไทย
1/3
Hanna

Conductivity (EC) Controller (0.0 - 199.9 μS/cm)

Product code: MX-11262

The BL983320 features a dosing relay that is activated when the reading is above a user programmable set point.

Prices are quoted, not listed.

Ask for a quotation and we’ll check the specification, pricing and availability, and confirm the delivery details before you order. No payment, no account, no minimum order.

Ask about this product on LINE

Request a quotation for this item

For a number outside Thailand, start with + and the country code.

A phone number or an email address is enough for us to reply to this request. Privacy Policy

For several items, add each one to a single request.

1

Prefer to talk? Call +66 99 241 5692, email us or chat on LINE.

Product description

Adjustable Dry Contact Dosing Relay

The BL983320 features a dosing relay that is activated when the reading is above a user programmable set point.

Programmable Overdose Protection

For enhanced safety the mini controller can be programmed to deactivate the dosing relay if the set point is not reached within a specified time interval. The overdosing timer is programmable from 5 to 30 minutes or disabled.

Relay Control Override

With the flick of a switch the mini controller's relay can be disabled (Off), placed in control (Auto), or be activated for manual operation (On) which is useful for priming a dosing pump.

Multicolor LED Indicator

Multicolor LED indicator allows an operator to quickly check the status of the controller.

Green = Meter in measurement mode and reading is below the set point.

Orange/Yellow = Reading is above the set point and the relay is activated.

Blinking Red = Indicates an alarm condition such as when the maximum dosing time has been exceeded.

Fuse Protected Dosing Contacts

The relay dosing contact is rated for up to a 2A load and is fuse protected.

Labeled Termination Connections

Quick-connect terminal blocks are clearly labeled for easy connection to power, conductivity probe and relay that can be used to operate a dosing pump, valve, audible alarm, or light.

1/2" NPT Male Threaded Amperometric Probe for Mounting In-line*

The BL983320 mini controller uses the HI7634-00 conductivity probe that is available with different cable lengths.*HI7634-00 is not included and must be ordered separately

Front View

Installation cut-out dimensions are provided as well as outside panel dimensions.

Side View

Adjustable location brackets allow the controller to slide easily and securely into place.

Specifications

EC Range0.0 to 199.9 &micro
EC Resolution0.1 &micro
EC Accuracy±2% f.s.
EC Calibrationmanual, with CAL trimmer
EC/TDS Temperature Compensationautomatic from 5 to 50°C (41 to 122°F)
Temperature Correction Coefficient² =2%/&#8451
EC/TDS Dosing Relaycontact closed when measure > setpoint maximum 2A (fuse protected), 250 Vac, 30 VDC
EC/TDS Dosing Set Pointadjustable from 0 to 199.9 &micro
Over Dosing Controladjustable, typically from 5 to approximately 30 minutes
Power Supplymodels œ-0in.=12 VDC adapter (included) models œ-1in.=115/230 VAC, 50/60Hz
Dimensions83 x 53 x 99 mm (3.3 x 2.1 x 3.9™™)
Weightmodels œ-0in.=200 g (7.1 oz.) models œ-1in.=300 g (10.6 oz.)
Ordering InformationBL983320-1 (115/230 VAC) and BL983320-0 (12 VDC) supplied with mounting brackets, transparent cover and instruction manual.

How quotation ordering works

See the full ordering guide
  1. 01

    Send your requirements

    Send the details you have, even if your list is incomplete. You can also browse the catalog to choose items.

  2. 02

    We check and quote

    We check the details, source the items and prepare your quotation with pricing and delivery information.

  3. 03

    Review and order

    Review the items, prices and delivery details before confirming your order. We flag any item that still needs confirmation.