Buying guidance
Guides & Articles
Guidance on choosing equipment, preparing purchasing documents and understanding laboratory standards, with examples from real orders.
Written by our team in Thailand, with source references for regulations and standards.
Latest·Procurement·26 Oct 2026·6 min read
Reordering lab glassware: three worked specification examples
Turn a beaker, sample-jar or dropper-bottle request into a clear order line. Copy the worksheet to record closures, pack units, substitutions and details still needing confirmation.
Nattayanee Maprasert · Head of Operations
Read the guideProcurement·7 Oct 2026·2 min read
A mixed purchasing list: equipment and everyday supplies in one order
One completed ManaEsse order put a digital balance, glass beakers, plastic crates, plastic jugs and culture bottles on one quotation and one purchase order, through to invoice and delivery. For a similar mixed list, give each line a model or specification, quantity and ordering unit, and mark urgent items.
Nattayanee Maprasert
Procurement·7 Oct 2026·5 min read
7 checks before accepting an equipment quotation
Before accepting an equipment quotation, check seven points: exact model or alternative, quantity and pack size, included accessories and services, delivery date per line, documents, warranty and service, and the full amount payable with the offer's validity.
Nattayanee Maprasert
Water & environment·28 Sept 2026·14 min read
Thailand's drinkable tap-water criteria, 2026 edition: what changed and what you can test on site
Thailand's 2026 drinkable tap-water criteria replace the 2020 edition: turbidity falls from 5 to 4 NTU, manganese from 0.3 to 0.08 mg/L, TDS is accepted only by drying at 180 °C and weighing, and certification results must come from a government or ISO/IEC 17025-accredited lab. The other 19 limits are unchanged.
Nattayanee Maprasert
Food & beverage·21 Sept 2026·15 min read
The room around the bench: cabinets, autoclaves and layout for a food microbiology lab in Thailand
Pathogen work in a food microbiology lab needs a Class II biological safety cabinet (NSF/ANSI 49 or EN 12469); a laminar flow bench protects only the sample. A steam autoclave meets the B.E. 2564 Labour regulation's pressure-vessel definition, and GMP 420's annual result must come from a government or accredited lab.
Nattayanee Maprasert
Food & beverage·21 Sept 2026·10 min read
Equipping a food microbiology lab for MOPH No. 416: what the methods themselves require
A food microbiology lab testing to MOPH No. 416 needs incubators holding 30, 35–37 and 41.5 °C at once, 15 x 90 mm and 15 x 100 mm petri dishes, a 45 ± 1 °C bath for tempering agar and, if it tests E. coli, a covered circulating bath at 44.5 ± 0.2 °C. Each figure comes from a method Annex 3 cites.
Nattayanee Maprasert
Procurement·14 Sept 2026·6 min read
Only a photo or an old model number? How to request the right equipment
To request equipment from a photo or old model number, send three photos (the whole item, the label with brand, model and full item code, and the existing part or packaging), the full model and part numbers, the quantity and pack size, and whether only the exact item will do.
Nattayanee Maprasert
Procurement·14 Sept 2026·4 min read
When is buying several equipment brands through one supplier worth it?
Buy several equipment brands through one supplier when coordinating the mixed list is worth more to your team than the price difference, and buy an urgent item separately if only another supplier can meet its date. Compare matching scope, the full amount payable, per-line delivery dates and warranty handling.
Nattayanee Maprasert
Industrial QC·31 Aug 2026·4 min read
Setting up an electronics plant in Thailand: what to buy locally
New electronics and PCB plants in Thailand import the process line under BOI privileges and should buy the rest locally: cleanrooms, QC lab instruments, consumables, chemicals, safety gear, DI water and calibration. Ask suppliers for a tax invoice with a full tax ID (VAT 7%), and order the QC lab with the line.
Nattayanee Maprasert
Analytical chem·31 Aug 2026·4 min read
What a PCB factory's QC lab actually needs
A PCB factory's QC lab does three jobs: plating-bath control, incoming inspection and finished-board checks. Buy the titration bench first (burettes, a 0.1 mg balance, pH and conductivity meters), use Type II water for routine titration, and outsource ionic contamination, solder float and cross-sections at first.
Nattayanee Maprasert
Industrial QC·31 Aug 2026·5 min read
What cleanroom class does an electronics or PCB plant actually need?
No Thai regulation sets a cleanroom class for electronics or PCB plants; the class comes from your process and your customer's audit. By convention SMT and assembly floors run ISO 8 (old Class 100,000) and imaging, film and solder-mask rooms ISO 7 (Class 10,000), always stated with the occupancy state.
Nattayanee Maprasert
Microbiology·24 Aug 2026·3 min read
Supplement factory QC labs: what Thai law actually requires you to test
Supplement factories in Thailand test against Clause 5 of MOPH No. 293 (B.E. 2548), not No. 416, which excludes supplements: E. coli below 3 MPN per gram, pathogens within FDA-set limits, vitamins and minerals from 15% of Thai RDI. GMP 420 adds yearly testing by a government or accredited lab.
Nattayanee Maprasert
medical-lab·24 Aug 2026·5 min read
Thai hospital labs after the ISO 15189:2022 deadline: two accreditation tracks, one equipment paper trail
Thai hospital labs are accredited through the Medical Technology Council's LA or through ISO 15189 at the Department of Medical Sciences (2022 edition only since 6 December 2025). With every instrument, collect matching sales documents, traceable calibration certificates, acceptance tests, manuals and written service terms.
Nattayanee Maprasert
Food & beverage·24 Aug 2026·7 min read
Pathogen testing under MOPH No. 416: the method table is your media list
Thailand's food pathogen criteria come from MOPH Notification No. 416 (B.E. 2563), which replaced No. 364 in January 2021. Annex 3 names the method per organism, such as ISO 6579-1 for Salmonella and BAM Chapter 12 for S. aureus, and those methods fix the culture media a lab must stock.
Nattayanee Maprasert
Food & beverage·1 Aug 2026·9 min read
Routine water testing for Thai factories: what changed in 2025
MOPH No. 462 B.E. 2568 replaced No. 61 as Thailand’s drinking-water standard on 12 December 2025. Test pH, free chlorine, turbidity, TDS and hardness daily on your bench; send heavy metals, the full contaminant list and coliform confirmation to a government or accredited lab at least yearly.
Nattayanee Maprasert
Procurement·1 Aug 2026·8 min read
Buying lab supplies from Thailand: Cambodia, Laos and Myanmar
ASEAN Form D duty preference covers only goods of ASEAN origin, such as Thai-made gloves and reagents, not European or Japanese instruments held in Thai stock. Cambodia pays easily in USD, Laos by wire in USD or baht, and Myanmar needs an import licence and access to foreign currency.
Nattayanee Maprasert
Food & beverage·31 Jul 2026·10 min read
Setting up a factory QC lab in Thailand: an equipment checklist
Buy by test frequency: run every-batch tests on your own bench and send certification tests to an accredited contract lab. GMP 420 does not require an in-house lab, an internal QC lab almost never needs ISO/IEC 17025, and three purchase phases beat one big order.
Nattayanee Maprasert
Procurement·31 Jul 2026·5 min read
Sourcing lab equipment and supplies from Thailand: a buyer’s guide
Buying from Thailand makes sense from Laos, Cambodia or Myanmar, for a mixed list on one quotation, and for Thai-made gloves and reagents. It does not for one branded instrument your own country’s distributor sells, for chemicals by courier, or for a small order shipped far.
Nattayanee Maprasert
Procurement·31 Jul 2026·5 min read
Writing a lab-equipment TOR that more than one supplier can bid on
Section 9 of Thailand’s Procurement Act bans specs written close to one brand or seller. Tie each number to the method that needs it, write ranges ("not less than 200 g") instead of single values, and add after-sales clauses; suppliers should propose fixes during the draft comment period.
Nattayanee Maprasert
Procurement·31 Jul 2026·3 min read
Registering as a government supplier in e-GP: the procedure, the deadline and the documents
Thai agencies cannot buy from a supplier that is not registered in e-GP. Register online at gprocurement.go.th, then email the signed notification form and documents within 15 days, or the system cancels the application and you start again. Registration is free.
Nattayanee Maprasert
Already have a list to procure?
Send your requisition list or TOR. Quotations are free, and we confirm pricing and delivery after checking your requirements.