Free quotations · Genuine products · Delivery across Thailand and worldwide
Free quotations · Genuine products · Delivery across Thailand and worldwide
Product code: MX-11265
Easy to handle Fire retardant casing Selectable overdose protection system Splash resistant cover BL 983324 is a panel mounted TDS controller, designed for easy installation, configuration and maintenance. The meter is provided with a dosing relay, activated when the TDS reading exceeds the set point value.
Prices are quoted, not listed. Add this product to your quote request and we reply with pricing and availability, usually within one business day. No payment, no account, no minimum order.
Prefer to talk? Call +66 99 241 5692, email us or chat on LINE.
Adjustable Dry Contact Dosing Relay The BL983324 features a dosing relay that is activated when the reading is above a user programmable set point. Programmable Overdose Protection For enhanced safety the mini controller can be programmed to deactivate the dosing relay if the set point is not reached within a specified time interval. The overdosing timer is programmable from 5 to 30 minutes or disabled. Relay Control Override With the flick of a switch the mini controller's relay can be disabled (Off), placed in control (Auto), or be activated for manual operation (On) which is useful for priming a dosing pump. Multicolor LED Indicator Multicolor LED indicator allows an operator to quickly check the status of the controller. Green = Meter in measurement mode and reading is below the set point. Orange/Yellow = Reading is above the set point and the relay is activated. Blinking Red = Indicates an alarm condition such as when the maximum dosing time has been exceeded. Fuse Protected Dosing Contacts The relay dosing contact is rated for up to a 2A load and is fuse protected. Labeled Termination Connections Quick-connect terminal blocks are clearly labeled for easy connection to power, conductivity probe and relay that can be used to operate a dosing pump, valve, audible alarm, or light. 1/2" NPT Male Threaded Amperometric Probe for Mounting In-line* The BL983324 mini controller uses the HI7634-00 conductivity probe that is available with different cable lengths. *HI7634-00 is not included and must be ordered separately Front View Installation cut-out dimensions are provided as well as outside panel dimensions. Side View Adjustable location brackets allow the controller to slide easily and securely into place.
| Range | 0.0 to 49.9 ppm |
|---|---|
| Resolution | 0.1 ppm |
| Accuracy @ 25°C | ±2% F.S. |
| TDS Conversion Factor | 0.5 |
| Probe | HI 7634-00 EC/TDS probe with internal temperature sensor and 2 m (6.6’) cable (not included) |
| Temperature Compensation | Automatic, 5 to 50°C (41 to 122°F) with ß = 2%/°C |
| Calibration | manual, with CAL trimmer |
| Dosing Relay | maximum 2A (fuse protected), 250 Vac, 30 VDC contact close when measure > set point |
| Setpoint | adjustable from 0 to 49.9 ppm |
| Overtime | adjustable, typically from 5 to approx. 30 minutes |
| Power Supply | See Chart |
| Dimensions | 79 x 49 x 95 mm (3.1 x 1.9 x 3.7’’) |
Hanna
MX-12184
HI7035/1L is a premium quality 111,800 µS/cm conductivity solution standardized with a conductivity meter that has been calibrated with potassium chloride NIST 2202 SRM (Standard Reference Material) in deionized water for analytical use in accordance with ISO 3696/BS3978.
Hanna
MX-12186
H7035M is a premium quality 111,800 µS/cm conductivity solution standardized with a conductivity meter that has been calibrated with potassium chloride NIST 2202 SRM (Standard Reference Material) in deionized water for analytical use in accordance with ISO 3696/BS3978.
Hanna
MX-12011
Hanna
MX-12163
H7030/1L is a premium quality 12,880 µS/cm conductivity solution standardized with a conductivity meter that has been calibrated with potassium chloride NIST 2202 SRM (Standard Reference Material) in deionized water for analytical use in accordance with ISO 3696/BS3978.
