Free quotations · Genuine products · Delivery across Thailand and worldwide
Free quotations · Genuine products · Delivery across Thailand and worldwide
Product code: MX-11538
CAL Check™ Feature The HI935001 includes Hanna's exclusive CAL Check™ technology. CAL Check™ allows the user to check calibration status. If the meter is calibrated, the display will automatically show "0.0°C" during startup. Low Battery Indicator The included AAA batteries provide 3500 hours of continuous use.
Prices are quoted, not listed. Add this product to your quote request and we reply with pricing and availability, usually within one business day. No payment, no account, no minimum order.
Prefer to talk? Call +66 99 241 5692, email us or chat on LINE.
CAL Check™ Feature The HI935001 includes Hanna's exclusive CAL Check™ technology. CAL Check™ allows the user to check calibration status. If the meter is calibrated, the display will automatically show "0.0°C" during startup. Low Battery Indicator The included AAA batteries provide 3500 hours of continuous use. When the battery level is below 10%, a warning symbol will blink to indicate low battery condition. When low battery power may affect your results, the meter will shut down to avoid erroneous readings caused by low battery level. Automatic Shut-off The auto-off feature can be set to shut the meter off at 8 or 60 minutes, or it can be disabled so that the meter continuously stays on. The auto-off feature prolongs battery life for peace-of-mind and energy savings if the meter is accidentally left on. Built to be Durable Waterproof casing and optional shockproof rubber boot offers maximum protection for a durable thermometer than can handle any environment. Portable Design Made to fit comfortably in your hand for on-the-go testing, the large LCD display provides at-a-glance readings from any angle. Single Button Operation With single button operation, temperature measurements could not more simple. This single button turns the meter on and off and allows you to cycle through options when in Setup Mode. Completely Interchangeable Probes The HI9350011 works with a wide range of thermistor probes, including an assortment of specially engineered FC766 probes, so you can get the right probe for your needs. Supplied with the FC766PW The FC766C1 is a rugged penetration probe designed for general food use. The stainless steel probe is both durable and easy to clean, the perfect combination to meet the tough environment encountered in the food sector. NIST Traceable Calibration Service This meter can be provided with a calibration certificate traceable to the National Institute of Standards and Technology (NIST) upon request. Traceabilty to NIST makes it possible to achieve the highest levels of measurement quality and productivity.
| Range | -50.0 to 199.9 °C 200 to 300 °C -58.0 to 399.9 °F 400 to 572 °F |
|---|---|
| Resolution | 0.1 °C (-50.0 to 199.9 °C) 1 °C (200 to 300 °C) 0.1 °F (-58.0 to 399.9 °F) 1 °F (400 to 572 °F) |
| Accuracy (@20˚C/68˚F) | ±0.4 °C (-50.0 to 300 °C) ±0.7 °F (-58.0 to 572 °F) |
| Probe | FC766C1 K-type thermocouple probe |
| Probe Accuracy | ±1.6 °C (-50.0 to 300 °C) ±2.9 °F (-58.0 to 572 °F) |
| Response time for 90% of final value | 4 seconds |
| Battery | 1.5V AAA (3 pcs.) approx. 3500 hours of continuous use |
| Auto-Off | user selectable: 8 min, 60 min or disabled |
| Environment | Rated operating condition: -20 to 50 °C (-4 to 122 °F) Limiting condition: -30 to 50 °C (-22 to 122 °F) Storage and transportation condition: -40 to 70 °C (-40 to 158 °F) Relative Humidity 100 % |
| Storage/transport temperature | -40 to 70 °C (-40 to 158 °F) |
| Dimensions | 140 x 57 x 28 mm (5.5 x 2.2 x 1.1in.) |
| Weight | 178 g (6.27 oz.) |
| Note | *The measurement range may be limited by probe type, and applies to the probe shaft. |
| Warranty | 2 years |
Hanna
MX-12881
HI9829-10/11 is for premium quality 10 ppm and 100 ppm (mg/L) Ammonium (as N) calibration standards. It is produced in accordance with ISO 3696/BS3978 standards using high purity salts, deionized water, certified weight-checked balances, and Class A glassware in a temperature controlled environment monitored with…
Hanna
MX-11175
HI9829-12/13 is for premium quality 10 ppm and 100 ppm (mg/L) Chloride calibration standards. It is produced in accordance with ISO 3696/BS3978 standards using high purity salts, deionized water, certified weight-checked balances, and Class A glassware in a temperature controlled environment monitored with certified…
Hanna
MX-11271
HI710029 is a blue rubber boot that is custom formed for the HI9814 GroLine portable pH/EC/TDS meter, HI991000 family of portables, and selected portable thermistor based thermometers. A complete lsit of compatible portable meters can be found below.
