We use cookies to improve this site and see how it is used. Cookies Policy

Skip to content
ไทย
1/2
Hanna

pH/EC/TDS/Temperature meter with HI1285-51 electrode; EC range: 0 to 1990 µS/cm, TDS range: 0 to 1990 ppm (mg/L)

Product code: MX-13140

The HI9812-51 is a pH/EC/TDS meter for agriculture, greenhouse and hydroponics applications. These meters feature a large LCD which displays either pH, EC, TDS or temperature readings along with tutorial instructions.

Prices are quoted, not listed.

Ask for a quotation and we’ll check the specification, pricing and availability, and confirm the delivery details before you order. No payment, no account, no minimum order.

Ask about this product on LINE

Request a quotation for this item

For a number outside Thailand, start with + and the country code.

A phone number or an email address is enough for us to reply to this request. Privacy Policy

For several items, add each one to a single request.

1

Prefer to talk? Call +66 99 241 5692, email us or chat on LINE.

Product description

The HI9812-51 is a pH/EC/TDS meter for agriculture, greenhouse and hydroponics applications. These meters feature a large LCD which displays either pH, EC, TDS or temperature readings along with tutorial instructions. The pH readings are displayed with a 0.1 resolution and an accuracy of +/-0.1 pH while the EC and TDS readings are displayed with a 10 mS/cm and 10 ppm (mg/L) resolution and 2% full scale accuracy. The temperature correction coeffcient (?) is fixed at 2 %/°C and allows for automatic temperature compensated measurements of EC and TDS. These meters are calibrated manually to a single point with the use of two trimmers. pH is calibrated to pH 7.01 while EC/TDS is calibrated to either 1.41 mS/cm (1413 µS/cm) or 1382 ppm. The LCD screen has battery life indicator as well as on-screen tutorial messages. No probe changes are required when switching your measured parameter between pH, conductivity and TDS. These multiparameter meters reduce the number of instruments required for daily water quality analysis. The supplied probe on all models feature a polypropylene body, amplified pH electrode with a built-in EC/TDS and temperature sensors. The amplifier for the pH electrode prevents interference from humidity and electrical noise from common sources including from motors, ballasts or pumps.

Specifications

pH Range0.0 to 14.0 pH
pH Resolution0.1 pH
pH Accuracy @ 25°C / 77°F±0.1 pH
pH Calibrationmanual, 1-point through offset trimmer
Temperature Range0.0 to 70.0 °C
Temperature Resolution10°C
Temperature Accuracy @ 25°C / 77°F±1°C
Temperature CalibrationAutomatic, from 0 to 70°C with ß=2% / °C
EC Range0 to 1990 µS/cm
EC Resolution10 µS/cm
EC Accuracy @25°C/77°F±2% F.S.
EC Calibrationmanual, 1-point through slope trimmer
TDS Range0 to 1990 ppm (mg/L)
TDS Resolution10 ppm (mg/L)
TDS Accuracy @ 25°C / 77°F±2% F.S.
TDS Conversion Factor0.5 ppm (mg/L) = 1 µS/cm
TDS Calibrationmanual, 1-point through slope trimmer
Power Supply9V / approximately 450 hours of continuous use
Environment0 to 50°C (32 to 122°F) RH max 100%
Dimensions145 x 80 x 36 mm (5.7 x 3.1 x 1.4in.)
Weight230 g (8.1 oz.)
Ordering InformationHI9812-51 is supplied with HI1285-51 multiparameter probe, HI70007 pH 7.01 calibration solution sachet, HI70032 1382 ppm (mg/L) calibration solution sachet, HI70031 1413 µS/cm calibration solution sachet, HI700661 electrode cleaning solution sachets (2), 9v battery (1), instructions and rugged carrying case.
Warranty2 years
Recommended ProbeHI1285-51 polypropylene body, pre-amplified multiparameter probe with internal temperature sensor, 8-pin DIN connector and 1 m (3.3') cable

How quotation ordering works

See the full ordering guide
  1. 01

    Send your requirements

    Send the details you have, even if your list is incomplete. You can also browse the catalog to choose items.

  2. 02

    We check and quote

    We check the details, source the items and prepare your quotation with pricing and delivery information.

  3. 03

    Review and order

    Review the items, prices and delivery details before confirming your order. We flag any item that still needs confirmation.