Stands, Clamps & Lab Tools

Ecosafe

MX-16505

Ecosafe

MX-16506

Ecosafe

MX-16507

Ecosafe

MX-16508

Ecosafe

MX-16509

Ecosafe

MX-16510

Ecosafe

MX-16511

Ecosafe

MX-16512

Ecosafe

MX-16513

Ecosafe

MX-16514

Ecosafe

MX-16515

Ecosafe

MX-16516

Ecosafe

MX-16517

Ecosafe

MX-16518

Ecosafe

MX-16519

Ecosafe

MX-16520

Ecosafe

MX-16521

Ecosafe

MX-16522

Ecosafe

MX-16523

Ecosafe

MX-16533

Ecosafe

MX-16534

Ecosafe

MX-16535

Ecosafe

MX-16536

Ecosafe

MX-16537

Ecosafe

MX-16539

Ecosafe

MX-16557

Ecosafe

MX-16558

Wuxi Safoo

MX-21069

MX-10962

Spatula spoon for scooping chemicals in science experiments, or for general scooping and levelling of things such as seasonings, drink powders, medicines and fertilisers

MX-10821

A device for grinding substances into smaller particles, or for grinding and mixing solids together. To use, place the substance in the mortar and press or grind it with the pestle until it is fine or uniform; do not pound, as that can crack the mortar. The surface of the pestle and the inside of the mortar are roughened to increase friction during grinding.

MX-11086

The mortar and pestle come in several sizes - small, medium and large - chosen to suit the medicine being prepared

MX-11065

Size 500 g.

MX-11059

• Length: 20 cm
• Spoon volume: 15 ml

MX-11068

Wooden-clamp test tube holder, suitable for test tubes 1.5 - 3 cm in diameter. Used to hold hot test tubes, glass rods and thermometers for the operator's safety. One end of the holder has a metal rod for mounting on a boss head or connector and stand to set up apparatus for scientific experiments, or for use when boiling solutions.

Gammaco

MX-11063

5x magnifier, metal frame, dia. 75 mm; Glass convex lens providing the magnification; Magnifier 3 inches in diameter; Lens set in a plastic frame with a handle

LP

MX-10922

For inverting and drying glassware; all pegs are the same length; Size: width x length = 520x680 cm

MX-10943

Glass lens, convex to provide the magnification; Magnifier 3 inches in diameter; Plastic frame around the lens and a handle to hold it by

MX-11077

Beaker tongs made of high-quality metal. The jaws that contact the beaker measure 6.5 x 8.5 cm and adjust from 0 - 20 cm, so they fit beakers of every size. The jaws are lined with heat-resistant asbestos that prevents the beaker or glassware from breaking, and are used to hold beakers or glassware while still hot, for example after boiling a solution.

MX-11066

A boss head, or connector, for fixing apparatus to a stand when setting up equipment for scientific experiments and research — for example holding a condenser clamp on the stand in a distillation set, fixing a test-tube holder or an iron ring to the stand for boiling or heating substances, and holding other physics and chemistry apparatus.

MX-11067

Made of high-quality rust-proof plated metal, highly durable with a service life of more than 10 years. Holds burettes on both sides (left and right), with plastic rollers that grip the burette firmly without breaking it. Suitable for burettes of many sizes, from 10 ml, 25 ml, 50 ml and 100 ml.

MX-10924

Plastic clamp for locking glass joints. Joint sizes:; Joint size 14/23, yellow plastic; Joint size 19/26, blue plastic; Joint size 24/29, green plastic; Joint size 29/32, red plastic

MX-11069

Condenser clamp for use with a connector or boss head and stand set, holding a condenser or other glassware and vessels such as Erlenmeyer flasks, beakers and test tubes when setting up apparatus for distillation, boiling and other experimental work. Made of high-quality metal; the four-pronged jaw is lined with soft cloth to reduce clamping force on the glassware and prevent breakage.

MX-11082

Cork borer set, 6 sizes per set; Made of stainless steel, in the form of hollow metal tubes; Used to bore holes in materials such as wood and rubber

MX-11078

Crucible tongs made of high-quality metal, scissor-like in shape, used to grip apparatus or vessels such as porcelain crucibles and dishes while they are hot.

MX-11079

Flask tongs for holding flasks or other glassware while hot or while containing substances at high temperature

MX-10957

A rubber adapter used in filtration.

MX-11071

Base with rod, rectangular base; Used to hold glassware so that it does not fall and break; Base made of steel, rod made of stainless steel, strong and durable

MX-11073

Tripod with a round cast-iron base, approximately 22 cm high with a 12 cm outer diameter