Labware & Lab Supplies

3M

U16-3M-1621-0000

Fits snugly even when a respirator is worn, and has no open vents, which raises the level of protection; supplied with an easily adjustable head strap. • Hard-coated lens resists scratches • Blocks 99.9% of UV radiation • Flexible frame for a snug fit • Four ventilation valves to prevent fogging, suited to work involving vapours, chemical splash or airborne dust

3M

U16-3M-1860-0000

Made with a facing material that resists the penetration of liquids (Fluid Resistance), suitable for hospital use and able to protect against bodily fluids. The mask is disposable.

3M

U16-3M-3200-0000

• Small single-cartridge half mask worn over the nose and mouth to filter hazardous substances in the surrounding air so they do not enter the respiratory system, without obstructing the field of view at work • Used together with a filter cartridge to protect against fine particles and organic vapour odours such as dust, oil mist, lead fume and exhaust smoke carried in the air, keeping them out of the respiratory system; lightweight

3M

U16-3M-3303-0100

Protects against vapours, solvents and acid mists. Contains 100 CC. of activated carbon. For spray painting, insecticide spraying, coating and chemical dyeing, maintenance work and degreasing. • Cartridge protecting against organic vapours and acid gases: acid mist, chlorine gas, hydrochloric acid, muriatic acid, sulfuric acid, sulfur dioxide gas

3M

U16-3M-3311-0055

Vapour cartridge plus filter pad, protecting against dust, vapours and solvents. Contains 55 CC. of activated carbon. For spray painting, insecticide spraying, coating and chemical dyeing, maintenance work and degreasing. Certified to the Korean standard. • Cartridge protecting against dust, vapours and solvents

3M

U16-3M-3700-0000

• Particulate filter retainer for the single-cartridge respirator, model 3200 • Made of lightweight plastic • The filter cover sits close to the face and does not obstruct vision while working • Three snap-lock tabs hold the filter firmly on the retainer so it cannot slip off; the internal ridge improves the seal, and the large inlet allows easy, comfortable breathing • Used with filter model 3744K, P2 standard

ITS

U05-IT-H008-0050

• Paper strips for testing the total hardness of a solution • Measurement uses the colorimetric method • Measuring levels are 0, 40, 80, 120, 180, 250, 425, 1000 ppm (mg/l) or 0, 2, 5, 7, 11, 15, 25, 58 gpg • The test takes only 3 seconds • One box of Total Hardness paper contains 50 test strips • Suitable for measuring total hardness in drinking water, tap water and so on

ITS

U05-IT-C024-0050

• Paper strips for testing the amount of free chlorine dissolved in a solution • Uses the colorimetric method and the TMB method • Measures at 0, 25, 50, 100, 200, 300, 400, 500 and 750 ppm (mg/l) • The test takes only 33 seconds • One box contains 50 test strips • Suitable for measuring free chlorine in drinking water, tap water and other water sources • A product of ITS, USA

ITS

U05-IT-C026-0050

• Test paper for measuring free chlorine dissolved in solution • Based on the colorimetric method and the TMB method • Measuring levels: 0, 0.05, 0.1, 0.2, 0.4, 0.6, 0.8, 1.2, 1.5, 2, 2.6, 4 and 6 ppm (mg/l) • Test takes only 40 seconds • 1 box contains 50 strips • Suitable for measuring free chlorine in drinking water, tap water and other water sources

3M

U16-3M-5010-5009

• 3M 501 particulate filter retainer, white (2 pieces/pack) • Filter retainer for dual-cartridge respirators, for filtering dust, mist and metal fume • Made of polypropylene, electrostatically charged to improve the capture of fine particles • Meets the United States N95 standard • Can be used together with 6000 series cartridges or on its own

3M

U16-3M-6001-0002

• Vapour cartridge for dual-cartridge respirators • Suitable for use with Organic Vapor • Protects against solvent vapours such as paint, lacquer, thinner, toluene, insecticide and oil • Rectangular plastic cartridge for use with 3M dual-cartridge replaceable respirators, fitted together by a bayonet attachment

3M

U16-3M-6002-0002

Protects against chlorine gas, hydrochloric acid, sulfuric acid, sulfur dioxide gas, chlorine gas and hydrogen sulfide gas (rotten-egg gas). Curved-back design that follows the contour of the face so it does not obstruct the view during work and improves balance. • Gas and vapour cartridge for dual-cartridge respirators

3M

U16-3M-6003-0002

Protects against organic vapours and acid gases (Organic Vapor-Acid Gas Cartridge). • Acid gas protection: chlorine, chlorine dioxide gas, hydrochloric acid, sulfuric acid, sulfur dioxide gas and hydrogen sulfide (rotten-egg) gas (escape use only) • Protects against solvent vapours such as paint, lacquer, thinner, toluene and insecticides

3M

U16-3M-6006-0001

Protects against solvent vapours, acid gases, formaldehyde vapour and ammonia / methylamine vapour; for areas where several types of gas and vapour are mixed together. The cartridge is square and made of plastic, for use with 3M dual-cartridge replaceable-filter respirators, fitted together with a bayonet attachment.

3M

U16-3M-6006-0000

• Medium-size dual-cartridge replaceable-filter respirator • A half-face respirator with replaceable dual cartridges, worn over the nose and mouth to filter hazardous airborne contaminants out of the breathing air; it consists of a facepiece and filters, is convenient to use, lightweight and easy to maintain • The facepiece is made of synthetic rubber with an adjustable head strap to suit the wearer's face

Kima

U03-CN-7101-0072

Microscope slides are high-quality clear glass sheets, very clean, for viewing samples under a microscope. They are packed in a vacuum box with paper between each slide to preserve quality, and have smooth rounded edges for safe handling.

3M

U16-3M-7502-0000

The 3M model 7502 respirator is made of extra-soft silicone, so the wearer stays comfortable where the mask touches the face while it remains strong and durable, and it comes with the 3M Cool Flow™ Exhalation Valve, which makes breathing easier and vents the heat and moisture that build up inside the mask, keeping it dry and comfortable for long periods of wear.

3M

U16-3M-8210-0000

A disposable 3M dust mask for PM 2.5, made to the US N95 standard with a filtration efficiency of no less than 95%, reliably filtering fine particulates such as PM 2.5 and PM 10 from cement dust, chemicals, metal fume and other pollution. Its electrostatic fibres capture airborne dust firmly, and the N95 mask is tested with 0.3 micron sodium chloride particles under NIOSH requirements.

3M

U16-3M-8511-0010

• Certified to the US NIOSH standard • Two braided head straps with two-point attachment for a secure seal against the face • Designed for greater wearing comfort • The 3M™ Cool Flow™ exhalation valve reduces the build-up of hot air inside the mask • Electrostatically charged fibres make breathing easier • The M-shaped nose clip is easy to adjust and puts little pressure on the nose for added comfort

3M

U16-3M-8822-0010

A device worn over the nose and mouth to keep airborne dust, mist and metal fume out of the respiratory system and to reduce the risk of infection; lightweight, easy to breathe through and not washable. Features • Made of polypropylene • Fitted with an exhalation valve for easier breathing • Electrostatically charged fibres

3M

U16-3M-9001-0025

Protects against dust particulates; certified to Australian standard AS/NZS 1716-1994 and rated in quality class P1, filtering dust and mist smaller than 10 microns with an efficiency of no less than 80 percent.

3M

U16-3M-9105-0050

Features • Disposable mask protecting against dust, mist, metal fume and germs • Foldable design, convenient to carry and space-saving to store • US N95 standard • Made of polypropylene, electrostatically charged to improve the capture of fine particles

3M

U16-3M-9913-8613

A 3M dust and vapour mask to Australian standard GP1, protecting against dust and vapours such as thinner, acetone, IPA, toluene and other solvents. Features • Electrostatically charged fibres • Excellent capture of particles smaller than 0.3 microns • Activated carbon layer filters nuisance chemical odours • Allows longer working periods • The Cool Flow exhalation valve vents heat faster, so breathing is easier

3M

U16-3M-9916-0000

Features • 3M dust mask, model 3M9916, with an exhalation valve • Lightweight, protects well against dust larger than 0.3 microns and against nuisance levels of acid gas and vapour odour • Two head straps to reduce strap pressure on the head, neck and face • The nose clip adjusts to fit the wearer's nose to reduce lens fogging and improve the fit • European P1 standard with a filtration efficiency of no less than 80%