All products

Tarsons

MX-13344

Material: PC/Non-toxic gel. An alternative to ice buckets for keeping reagents and enzymes cool. Also protects critical samples from temperature fluctuations in the freezers. Will maintain temperature for approximately 1 hour on the bench. For -20°C Mini Coolers, freeze for 24 hrs at -20°C to -25°C before use.

Tarsons

MX-13345

aterial: PC/Non-toxic gel. An alternative to ice buckets for keeping reagents and enzymes cool. Also protects critical samples from temperature fluctuations in the freezers. Will maintain temperature for approximately 1 hour on the bench. For -20°C Mini Coolers, freeze for 24 hrs at -20°C to -25°C before use.

3M

MX-10967

Fits snugly even when a respirator is worn, and has no open vents, which raises the level of protection; supplied with an easily adjustable head strap.

3M

MX-10969

Made with a facing material that resists the penetration of liquids (Fluid Resistance), suitable for hospital use and able to protect against bodily fluids. The mask is disposable.

3M

MX-10970

Small single-cartridge half mask worn over the nose and mouth to filter hazardous substances in the surrounding air so they do not enter the respiratory system, without obstructing the field of view at work

3M

MX-10971

Protects against vapours, solvents and acid mists. Contains 100 CC. of activated carbon. For spray painting, insecticide spraying, coating and chemical dyeing, maintenance work and degreasing.

3M

MX-10972

Vapour cartridge plus filter pad, protecting against dust, vapours and solvents. Contains 55 CC. of activated carbon. For spray painting, insecticide spraying, coating and chemical dyeing, maintenance work and degreasing. Certified to the Korean standard.

3M

MX-10976

Vapour cartridge for dual-cartridge respirators; Suitable for use with Organic Vapor; Protects against solvent vapours such as paint, lacquer, thinner, toluene, insecticide and oil

3M

MX-10977

Protects against chlorine gas, hydrochloric acid, sulfuric acid, sulfur dioxide gas, chlorine gas and hydrogen sulfide gas (rotten-egg gas). Curved-back design that follows the contour of the face so it does not obstruct the view during work and improves balance.

3M

MX-10978

Protects against organic vapours and acid gases (Organic Vapor-Acid Gas Cartridge).

3M

MX-10979

Protects against solvent vapours, acid gases, formaldehyde vapour and ammonia / methylamine vapour; for areas where several types of gas and vapour are mixed together. The cartridge is square and made of plastic, for use with 3M dual-cartridge replaceable-filter respirators, fitted together with a bayonet attachment.

3M

MX-10980

Medium-size dual-cartridge replaceable-filter respirator

3M

MX-10981

The 3M model 7502 respirator is made of extra-soft silicone, so the wearer stays comfortable where the mask touches the face while it remains strong and durable, and it comes with the 3M Cool Flow™ Exhalation Valve, which makes breathing easier and vents the heat and moisture that build up inside the mask, keeping it dry and comfortable for long periods of wear.

3M

MX-10984

A disposable 3M dust mask for PM 2.5, made to the US N95 standard with a filtration efficiency of no less than 95%, reliably filtering fine particulates such as PM 2.5 and PM 10 from cement dust, chemicals, metal fume and other pollution. Its electrostatic fibres capture airborne dust firmly, and the N95 mask is tested with 0.3 micron sodium chloride particles under NIOSH requirements.

3M

MX-10985

Certified to the US NIOSH standard; Two braided head straps with two-point attachment for a secure seal against the face; Designed for greater wearing comfort

3M

MX-10986

A device worn over the nose and mouth to keep airborne dust, mist and metal fume out of the respiratory system and to reduce the risk of infection; lightweight, easy to breathe through and not washable.

3M

MX-10987

Protects against dust particulates; certified to Australian standard AS/NZS 1716-1994 and rated in quality class P1, filtering dust and mist smaller than 10 microns with an efficiency of no less than 80 percent.

3M

MX-10988

Disposable mask protecting against dust, mist, metal fume and germs; Foldable design, convenient to carry and space-saving to store; US N95 standard

3M

MX-10989

A 3M dust and vapour mask to Australian standard GP1, protecting against dust and vapours such as thinner, acetone, IPA, toluene and other solvents.

3M

MX-10990

3M dust mask, model 3M9916, with an exhalation valve; Lightweight, protects well against dust larger than 0.3 microns and against nuisance levels of acid gas and vapour odour

Axygen

MX-10805

Pipette tips, 10 µl; Made of Polypropylene (PP) plastic, Certified RNase, DNase, and endotoxin free; Pack size 1000 pieces per pack, non-sterile

Axygen

MX-10806

Pipette tips, 20 µl; Made of Polypropylene (PP) plastic, Certified RNase, DNase, and endotoxin free; Pack size 1000 pieces per pack, non-sterile

Tarsons

MX-13324

Material: PC/Non-toxic gel. An alternative to ice buckets for keeping reagents and enzymes cool. Also protects critical samples from temperature fluctuations in the freezers. Will maintain temperature for approximately 1 hour on the bench. For 0°C Mini Coolers, freeze for 24 hrs at -5°C to -10°C before use

Tarsons

MX-13321

Material: PC/Non-toxic gel. An alternative to ice buckets for keeping reagents and enzymes cool. Also protects critical samples from temperature fluctuations in the freezers. Will maintain temperature for approximately 1 hour on the bench. For 0°C Mini Coolers, freeze for 24 hrs at -5°C to -10°C before use

Tarsons

MX-13322

Material: PC/Non-toxic gel. An alternative to ice buckets for keeping reagents and enzymes cool. Also protects critical samples from temperature fluctuations in the freezers. Will maintain temperature for approximately 1 hour on the bench. For 0°C Mini Coolers, freeze for 24 hrs at -5°C to -10°C before use

Tarsons

MX-13323

Material: PC/Non-toxic gel. An alternative to ice buckets for keeping reagents and enzymes cool. Also protects critical samples from temperature fluctuations in the freezers. Will maintain temperature for approximately 1 hour on the bench. For 0°C Mini Coolers, freeze for 24 hrs at -5°C to -10°C before use

Hanna

MX-12277

HI7087L is a premium quality 0.23 g/L Na+ (sodium) standard solution produced in accordance with ISO 3696/BS3978 standards using high purity salts, deionized water, certified weight-checked balances, and Class A glassware in a temperature controlled environment monitored with certified thermometers.

Hanna

MX-12278

HI7087M is a premium quality 0.23 g/L Na+ (sodium) standard solution produced in accordance with ISO 3696/BS3978 standards using high purity salts, deionized water, certified weight-checked balances, and Class A glassware in a temperature controlled environment monitored with certified thermometers.

Hanna

MX-12274

HI7085M is a premium quality 0.3 g/L NaCl calibration standard solution produced in accordance with ISO 3696/BS3978 standards using high purity salts, deionized water, certified weight-checked balances, and Class A glassware in a temperature controlled environment monitored with certified thermometers.

Hanna

MX-12273

HI7085L is a premium quality 0.3 g/L NaCl calibration standard solution produced in accordance with ISO 3696/BS3978 standards using high purity salts, deionized water, certified weight-checked balances, and Class A glassware in a temperature controlled environment monitored with certified thermometers.

Nichiryo

MX-10132

V-unique

MX-11023

Suitable for ordinary hard water not exceeding 300 mg/l, for checking and controlling water hardness — for example in cooling water systems, paper manufacturing, the weaving industry and dyeing.

V-unique

MX-11024

Suitable for mildly hard water; for checking and controlling water hardness, for example in cooling water systems, paper manufacturing and the weaving industry.

Tarsons

MX-13326

Ideal for use in blood banking, urinalysis, hematology and microbiology

Tarsons

MX-13327

Ideal for use in blood banking, urinalysis, hematology and microbiology

Tarsons

MX-13329

Medical grade resin confirming to USP Class VI

Tarsons

MX-13328

Tarsons

MX-13330

Hanna

2 variants: 230 · 500

HI7037M is a premium quality 100% NaCl calibration solution for % readings of salinity. HI7037M is produced in accordance with ISO 3696/BS3978 standards using high purity salts, deionized water, certified weight-checked balances, and Class A glassware in a temperature controlled environment monitored with certified…

Tarsons

MX-13331

Medical grade resin confirming to USP Class VI

Tarsons

MX-13332

Hanna

MX-12187

H7036L is a premium quality 12.41 g/L (ppt) TDS calibration solution standardized with a conductivity meter that has been calibrated with

Hanna

MX-12282

HI7089M is a premium quality 125 g/L NaCl calibration standard solution produced in accordance with ISO 3696/BS3978 standards using high purity salts, deionized water, certified weight-checked balances, and Class A glassware in a temperature controlled environment monitored with certified thermometers.

Hanna

MX-12281

HI7089L is a premium quality 125 g/L NaCl calibration standard solution produced in accordance with ISO 3696/BS3978 standards using high purity salts, deionized water, certified weight-checked balances, and Class A glassware in a temperature controlled environment monitored with certified thermometers.

interscience

MX-10424

Hanna

MX-12175

HI7032/1L is a premium quality 1,382 mg/L (ppm) TDS calibration solution standardized with a conductivity meter that has been calibrated with

Hanna

MX-12177

H7032M is a premium quality 1,382 mg/L (ppm) TDS calibration solution standardized with a conductivity meter that has been calibrated with potassium chloride NIST 2202 SRM (Standard Reference Material) in deionized water for analytical use in accordance with ISO 3696/BS3978.