Specification for a TOR or reference price
Analytical Balance Specification, 0.1 mg (คุณลักษณะเฉพาะ)
An analytical balance specification (0.1 mg readability, 220 g capacity) in 15 lines: 8 mandatory and 7 desired, each with how it is checked at acceptance. Copy it into a TOR or a reference-price file, or download the Excel workbook with the table already filled in. Free, no signup.
The TOR workbook with this table already filled in: a numbered TOR outline and the specification sheet with level, verification method and a vendor-response column. Bilingual Thai and English; the working sheets carry no branding. Edit freely.
The specification
8 mandatory lines (an offer that fails one is out) and 7 desired lines (scored, not disqualifying).
| Item | Requirement | Level | Verified by |
|---|---|---|---|
| 1. Capacity | Maximum capacity at least 220 g | Mandatory | Datasheet and a 200 g weight on the pan |
| 2. Readability | 0.1 mg (0.0001 g) over the whole weighing range | Mandatory | Demonstration |
| 3. Repeatability | Standard deviation not more than 0.1 mg, as the maker’s guaranteed limit value | Mandatory | Datasheet and ten repeat weighings of one weight |
| 4. Linearity | Within ±0.2 mg | Desired | Datasheet and the calibration certificate |
| 5. Stabilization time | 2 seconds or less, as the maker’s typical value | Desired | Datasheet |
| 6. Adjustment | A built-in adjustment weight that runs automatically on a temperature change or at set times; external weights also accepted | Mandatory | Run an adjustment on delivery and read its record |
| 7. Draft shield | Glass draft shield with sliding doors, removable for cleaning | Mandatory | Visual check |
| 8. Weighing pan | Diameter at least 90 mm | Desired | Measure |
| 9. Levelling | A level indicator visible from the front, with adjustable feet | Desired | Visual check |
| 10. Interfaces and records | USB and RS-232, and a GLP/GMP-format report (date, time, balance ID, adjustment result) to a printer or PC | Desired | Send a reading to a PC or printer |
| 11. Below-balance weighing | A below-balance weighing hook or port | Desired | Visual check |
| 12. Power | Runs on 220 V 50 Hz, through an adapter if needed | Mandatory | The rating plates on the balance and adapter |
| 13. Calibration certificate | Calibrated at the installed site by an ISO/IEC 17025-accredited laboratory, with a certificate naming the serial number and stating the uncertainty | Mandatory | Review the certificate |
| 14. Warranty | At least 1 year from the acceptance date | Mandatory | Warranty letter |
| 15. Installation and training | Installation, testing and hands-on training in Thai | Desired | Training sign-in sheet |
Every line about the instrument is met by current models from at least three makers, checked against the makers’ own documents: Sartorius Entris II, METTLER TOLEDO MA204, A&D GX-224A, Shimadzu AP224W, RADWAG AS 220.R2 PLUS
Lines that lock a spec to one brand
Readability alone
A 0.1 mg readability is only the last digit on the display; it says nothing about how closely repeat weighings agree. Always add repeatability and linearity.
Maker trade names
FACT, isoCAL, QuickLock and "monolithic cell" each belong to one brand. Describe the function instead, such as automatic adjustment on a temperature change.
One model’s typical values
A 0.08 mg repeatability or 1 ppm/K drift is a typical value or an upper-tier figure from one brand; most makers guarantee 0.1 mg. Use limits at least three makers guarantee.
Minimum weight where no method needs it
A USP <41> minimum weight matters only for pharmacopoeial methods and is determined on site. Leave it out unless the method cites USP.
Trade-approved balances
OIML Class I approval is for legal-for-trade use, which a lab does not need. E2 is a class of test weights, not of balances.
Checks on delivery day
- Set the balance on a firm bench away from air-conditioner draft, centre the level bubble, confirm 220 V, and warm it up for the time the manual gives.
- Run the internal adjustment from the keypad: it should finish and print or export a record with date, time and serial number. Confirm automatic adjustment is switched on.
- Place one weight of about 200 g ten times, doors closed each time, and compute the standard deviation: 0.1 mg or less.
- Compare the reading with a certified test weight, then place about 100 g at the centre and the four sides of the pan: the readings should agree closely.
- The serial number on the calibration certificate matches the balance, readings reach a PC or printer, and the draft-shield parts, below-balance hook and manual are all present.
Record the result on a goods receipt: free goods receipt template
Quotations for the reference price
Send this table, edited to your needs, and we quote against it line by line: brand and model, how each line is met, and the maker’s documents that show it. Any brand on one quotation. Request quotations for a reference price
Models we quote for this instrument: Sartorius Entris 224i-1S · Sartorius BSA224I-1S·See the catalog shelf
Common questions
What is the difference between readability and accuracy?
Readability is the last digit the display shows. Accuracy shows in repeatability (how closely repeat weighings of one object agree) and linearity (how correct the reading is across the range), so a 0.1 mg balance needs both in its spec.
At what load should repeatability be checked?
Makers state repeatability at different loads, some at 5% of capacity and some at full capacity. This table checks it at about 200 g; if your work is mostly small samples, state the test load that matches it.
When is a 5-place balance needed?
When you routinely weigh very small amounts, such as pharmacopoeial work below a few hundred milligrams. General analytical work is well served by a 4-place balance.
Why calibrate at the installed site?
What a fine balance reads depends on where it stands and the room it is in, so a calibration after installation reflects the balance where it is used, and an accredited certificate stands as quality-system evidence.
Other ready-written specifications: Binocular microscope · Vertical lab autoclave·The blank TOR workbook
Specification ready? Get quotations against it
Paste or upload the table and we answer it line by line, with the maker documents your acceptance check will ask for.