Hanna

Hanna

MX-11387

Genuine Hanna Concentrated Potassium Iodide Reagent 30%, 500 mL.

Hanna

MX-12153

• Package: Cuvettes

Hanna

MX-12154

• Package: Packets

Hanna

MX-12347

HI747-11 is a high-quality set of calibration standards that allows users to validate the Copper Low Range Checker®HC - HI747. The HI747-11 includes one sealed cuvette for zero ppb copper and one cuvette that is tinted to an equivalent 500 ± 100 ppb copper sample @ 25oC.

Hanna

MX-12348

The HI747-25 are high quality reagents that are pre-measured, allowing for users to achieve fast and accurate measurements with their Copper Low Range Checker® HC. These reagents follow the Bicinchoninate Method in which the reaction between copper and the reagent causes a purple tint in the sample.

Hanna

MX-12762

The HI95747-03 are high quality reagents that are pre-measured, allowing for users to achieve fast and accurate colorimetric measurements. The method is an adaptation of the USEPA approved bicinchoninate method. The reaction between copper and the reagent causes a color change in the sample.

Hanna

MX-11397

The HI83740-20 are high quality reagents that are pre-measured, allowing for users to achieve fast and accurate colorimetric measurements. These reagents follow a method in which the reaction between copper and reagents causes a purple tint in the sample.

Hanna

MX-11406

• Messbereich: 0 bis 1,0 mg/l
• Auflösung: 0,2 mg/l

Hanna

MX-11415

• Messbereich: 50-150 g/L (ppt)
• Auflösung: 5 g/L (ppt) (0.5%)

Hanna

MX-11413

• Messbereich: 0 bis 150 mg/l
• Auflösung: 5 mg/l

Hanna

MX-11412

• Messbereich: 40 bis 500 mg/l
• Auflösung: 20 mg/l

Hanna

MX-11411

• Messbereich: 400 bis 3000 mg/l
• Auflösung: 100 mg/l

Hanna

MX-12670

The HI93714-03 are high quality reagents that are pre-measured, allowing for users to achieve fast and accurate colorimetric measurements. These reagents are used in a method that is adapted from the Standard Methods for the Examination of Water and Wastewater, 18th edition, Pyridine-Pyrazalone method.

Hanna

MX-12686

The HI93722-03 are high quality reagents that are pre-measured, allowing for users to achieve fast and accurate colorimetric measurements. These reagents follow an adaptation of the turbidimetric method. The reaction between cyanuric acid and reagent causes a white suspension in the sample.

Hanna

MX-11427

Genuine Hanna Desiccant Cartridge for Titrant or Vessel for HI903.

Hanna

MX-12195

HI7041L is designed to refill the electrolyte solution for polarographic dissolved oxygen probes. Polarographic sensor technology is based on the Ross and Clark polarographic measurement method. An oxygen probe is composed of a platinum electrode and a solid silver electrode.

Hanna

MX-12700

The HI93732-03 are high quality reagents that are pre-measured, allowing for users to achieve fast and accurate colorimetric measurements. The method is an adaptation of the Standard Methods for Examination of Water and Wastewater, 18th edition, azide modified Winkler method.

Hanna

MX-11448

The HI93711-D3 are high quality liquid reagents that allow for users to achieve fast and accurate colorimetric measurements. These reagents follow an adaptation of the USEPA method 330.5 and Standard Method 4500-Cl G.

Hanna

MX-11477

The most common cause for pH measurement inaccuracies is an unclean or improperly cleaned electrode. This is very important to note, because during calibration, the instrument assumes that the electrode is clean and that the standardization curve created during the calibration process will remain a valid reference…

Hanna

MX-12258

Genuine Hanna Electrode Cleaning Solution for Oil and Fats (230 mL).

Hanna

MX-11485

The HI740157P electrode refilling pipettes allow for safe, convenient, and precise transfer of electrolyte fill solution into refillable Hanna electrodes.

Hanna

MX-12030

• Description: electrode storage solution
• Package: bottle

Hanna

MX-12250

The HI7072L 1M KNO3 (potassium nitrate) electrode fill solution is chloride free. It is mainly used as a reference fill solution for Bromide, Cadmium, Chloride, Cupric, Cyanide, Iodide, Lead/Sulfate, and Silver/Sulfide electrodes.

Hanna

2 variants: 230 · 500

pH and ORP electrodes are available with a single junction or double junction reference cell. The single junction reference electrode is made with a silver (Ag) wire coated with silver chloride (AgCl). This wire is in contact with the sample to be measured by a fill solution that leaks through a junction.

Hanna

MX-12268

The electrolyte level in refillable electrodes should be checked before performing any measurement. If the level is low, refill with the proper electrolyte solution to ensure the correct electrode performance.

Hanna

MX-11491

• Type: titration
• Smallest Increment: 100 mg/L (500 to 10000 mg/L range) 1000 mg/L (5000 to 100000 mg/L range)

Hanna

MX-11492

• Quantity: 100 tests

Hanna

MX-11519

Genuine Hanna Fehling Solution A, 500 mL.

Hanna

MX-11520

Genuine Hanna Fehling Solution B, 500 mL.

Hanna

MX-12715

The HI93739-03 are high quality reagents that are pre-measured, allowing for users to achieve fast and accurate colorimetric measurements. The method is an adaptation of EPA method 340.1 and the SPADNS method. The reaction between fluoride and the reagent causes a color change in the sample.

Hanna

MX-12694

The HI93729-03 are high quality reagents that are pre-measured, allowing for users to achieve fast and accurate colorimetric measurements. The method is an adaptation of the EPA method 340.1 and SPADNS method. The reaction between fluoride and the reagent causes a color change in the sample.

Hanna

2 variants: 230 · 500

HI70701M is a 1 g/L standard solution of fluoride used to calibrate the fluoride solid state ion selective electrode (ISE). Hanna ISE standard solutions are manufactured with high purity chemicals and bottled in our own state-of-the-art facility.

Hanna

MX-12237

HI70701/1L is a 1 g/L standard solution of fluoride used to calibrate the fluoride solid state ion selective electrode (ISE). Hanna ISE standard solutions are manufactured with high purity chemicals and bottled in our own state-of-the-art facility.

Hanna

MX-12240

HI70702/1L is a 10 mg/L standard solution of fluoride used to calibrate the fluoride solid state ion selective electrode (ISE). Hanna ISE standard solutions are manufactured with high purity chemicals and bottled in our own state-of-the-art facility.

Hanna

MX-12242

HI70702M is a 10 mg/L standard solution of fluoride used to calibrate the fluoride solid state ion selective electrode (ISE). Hanna ISE standard solutions are manufactured with high purity chemicals and bottled in our own state-of-the-art facility.

Hanna

MX-12241

HI70702L is a 10 mg/L standard solution of fluoride used to calibrate the fluoride solid state ion selective electrode (ISE). Hanna ISE standard solutions are manufactured with high purity chemicals and bottled in our own state-of-the-art facility.

Hanna

MX-12243

HI70703/1L is a 100 mg/L standard solution of fluoride used to calibrate the fluoride solid state ion selective electrode (ISE). Hanna ISE standard solutions are manufactured with high purity chemicals and bottled in our own state-of-the-art facility.

Hanna

MX-12245

HI70703M is a 100 mg/L standard solution of fluoride used to calibrate the fluoride solid state ion selective electrode (ISE). Hanna ISE standard solutions are manufactured with high purity chemicals and bottled in our own state-of-the-art facility.

Hanna

MX-12244

HI70703L is a 100 mg/L standard solution of fluoride used to calibrate the fluoride solid state ion selective electrode (ISE). Hanna ISE standard solutions are manufactured with high purity chemicals and bottled in our own state-of-the-art facility.

Hanna

MX-12704

The HI93734-03 are high quality reagents that are pre-measured, allowing for users to achieve fast and accurate colorimetric measurements. These reagents follow an adaptation of the USEPA method 330.5 and Standard Method 4500-Cl G. The reaction between chlorine and the reagents causes a pink tint in the sample.

Hanna

MX-12638

Genuine Hanna Free Chlorine Liquid Reagents (300 tests).

Hanna

MX-12637

The HI93701-03 are high quality reagents that are pre-measured, allowing for users to achieve fast and accurate colorimetric measurements. These reagents follow the DPD Method in which the reaction between chlorine and reagent causes a pink tint in the sample.

Hanna

MX-12371

The HI762-25 are high-quality reagents that are pre-measured, allowing for users to achieve fast and accurate measurements with their Free Chlorine Ultra Low Range Checker® HC. These reagents follow the DPD Method in which the reaction between chlorine and reagent causes a pink tint in the sample.

Hanna

MX-12764

The HI95762-03 are high quality reagents that are pre-measured, allowing for users to achieve fast and accurate colorimetric measurements. These reagents follow an adaptation of the Standard Method 4500-Cl G, in which the reaction between free chlorine and the DPD reagent causes a pink tint in the sample.

Hanna

MX-11568

Genuine Hanna Gelled Bridge Electrolyte.

Hanna

MX-12221

The most common cause for pH measurement inaccuracies is an unclean or improperly cleaned electrode. This is very important to note, because during calibration, the instrument assumes that the electrode is clean and that the standardization curve created during the calibration process will remain a valid reference…

Hanna

MX-11573

• Description: general purpose cleaning solution
• Package: sachet

Hanna

MX-11577

Genuine Hanna Glass Cuvette with Cap (2 pieces).