Hanna

Hanna

MX-11513

• Referenz: Einfach, Ag/AgCl
• Diaphragma: Offen

Hanna

MX-11514

• Range: pH: 0 to 12 pH; Temperature: -5 to 30°C
• Size: Round (Ø 9.5 mm)

Hanna

MX-11516

• Messbereiche: pH: 5 bis 8 pH; Temperatur: 0 bis 80°C
• Masse: Rund (Ø 12mm) Tauchtiefe 120mm

Hanna

MX-11517

• Referenz: Einfach, Ag/AgCl
• Diaphragma: Offen

Hanna

MX-11518

• Referenz: Einfach, Ag/AgCl
• Diaphragma: Keramik, einfach

Hanna

MX-11521

Genuine Hanna Filter Disc for Select Photometers (25 pcs).

Hanna

MX-11533

Let your photometer guide you through setup, calibration, and testing with on-screen tutorials and animations so you always know the next step. Simply access Tutorial Mode at any stage in the setup or measurement process with the dedicated help key.

Hanna

MX-11532

Let your photometer guide you through setup, calibration, and testing with on-screen tutorials and animations so you always know the next step. Simply access Tutorial Mode at any stage in the setup or measurement process with the dedicated help key.

Hanna

MX-11537

• Range: -50.0 to 199.9 °C / -58.0 to 399.9°F 200 to 1350 °C / 400 to 2462 °F
• Resolution: 0.1 °C (up to 199.9 °C) / 1°C (outside) 0.1 °F (up to 399.9 °F) / 1 °F (outside)

Hanna

MX-11538

• Range: -50.0 to 199.9 °C 200 to 300 °C -58.0 to 399.9 °F 400 to 572 °F
• Resolution: 0.1 °C (-50.0 to 199.9 °C) 1 °C (200 to 300 °C) 0.1 °F (-58.0 to 399.9 °F) 1 °F (400 to 572 °F)

Hanna

MX-11546

• Range: -50.0 to 400.0 °C -58.0 to 752.0 °F
• Resolution: 0.1 °C / 0.1 °F

Hanna

MX-11547

• Range: -50.0 to 400.0 °C -58.0 to 752.0 °F
• Resolution: 0.1 °C / 0.1 °F

Hanna

MX-11548

• Range: -50.0 to 199.9 °C 200 to 300 °C -58.0 to 399.9 °F 400 to 572 °F
• Resolution: 0.1 °C (-50.0 to 199.9 °C) 1 °C (200 to 300 °C) 0.1 °F (-58.0 to 399.9 °F) 1 °F (400 to 572 °F)

Hanna

MX-11549

• Range: -50.0 to 150.0 °C -58.0 to 302.0 °F
• Resolution: 0.1 °C 0.1 °F

Hanna

MX-12549

The HI84533-61 is a 230 mL bottle of formol base reagent that is used for the determination of formol number in wines and fruit juices.

Hanna

MX-11561

Genuine Hanna Free & Total Chlorine High Range CAL Check standard kit.

Hanna

MX-11556

• Chlorine Free UHR Range: 0.00 to 5.00 mg/L (ppm)
• Chlorine Free UHR Resolution: 0.01 mg/L

Hanna

MX-11553

HI97710-11 is a high quality set of calibration standards that allows users to validate and calibrate the pH range found in compatible portable photometers that have a 6.5 to 8.5 pH range. The HI96710-11 includes one sealed A cuvette for zeroing the meter and one B cuvette that is used to validate or calibrate.

Hanna

MX-11554

• Chlorine Free Total Range: 0.00 to 10.00 mg/L (ppm)
• Chlorine Free Total Resolution: 0.01 mg/L from 0.00 to 3.50 mg/L, 0.10 mg/L above 3.50 mg/L

Hanna

MX-11555

• Chlorine Free Total Range: 0.00 to 5.00 mg/L
• Chlorine Free Total Resolution: 0.01 mg/L

Hanna

MX-11350

Reagenzien für die photometrische Bestimmung von Chlor Fre i. DPD Methode.

Hanna

MX-11558

Attention: the indicator solution needs to be activated before use.

Hanna

MX-12369

HI762-11 is a high-quality set of calibration standards that allows users to validate the Free Chlorine Ultra Low Range Checker®HC - HI762. The HI762-11 includes one sealed cuvette for zero ppb free chlorine and one cuvette that is tinted to an equivalent XXX +/- XXX ppb free chlorine sample @ 25°C.

Hanna

MX-11560

• Chlorine Free uLR Range: 0.000 to 0.500 mg/L
• Chlorine Free uLR Resolution: 0.001 mg/L (ppm)

Hanna

MX-12308

• Range: 0.00 to 2.00 ppm
• Resolution: 0.01 ppm

Hanna

MX-11569

• Description: technical calibration buffer
• Certificate of Analysis: yes

Hanna

MX-11570

• Description: technical calibration buffer
• Certificate of Analysis: yes

Hanna

MX-11571

HI7000 Series Standard pH Buffer Solutions - pH 7.01 & pH 10.01

Hanna

MX-11572

• Description: technical calibration buffer
• Certificate of Analysis: yes

Hanna

MX-12480

The most common cause for pH measurement inaccuracies is an unclean or improperly cleaned electrode. This is very important to note, because, during calibration, the instrument assumes that the electrode is clean and that the standardization curve created during the calibration process will remain a valid reference…

Hanna

MX-11578

HI740220 are two replacement 25 mL glass vials with caps for the HI83749 Portable Turbidity and Bentocheck Meter. When determining the amount of bentonite fining reagent to add to a wine, four samples should be prepared in 25 mL glass vials.

Hanna

MX-11579

Genuine Hanna Glass Dispensing Tip for the HI903 (2 pcs).

Hanna

MX-11580

Genuine Hanna Glass Joint Grease for the HI904/HI934.

Hanna

MX-11581

Genuine Hanna Glass Stopper, Standard Taper 19 for the HI904.

Hanna

MX-11582

Genuine Hanna Glass Titration and Solvent Beaker for the HI903.

Hanna

4 variants: 100 · 200 · 1000 · 2000

The HI731341 Graduated Pipette is able to accurately transfer 1000 µL volumes of liquid that need to be precisely dosed. The liquid is aspirated into disposable tips, eliminating cross contamination of samples.

Hanna

2 variants: 5 · 60

Genuine Hanna 5 mL Graduated Syringe.

Hanna

MX-12298

HI710025 is a green rubber boot that is custom formed for the old-styled HI9814 GroLine portable pH/EC/TDS meter, HI991000 family of portables, and selected portable thermistor based thermometers. A complete list of compatible portable meters can be found below.

Hanna

MX-11590

HI710030 is a green rubber boot that is custom formed for the HI9814 GroLine portable pH/EC/TDS meter, HI991000 family of portables, and selected portable thermistor based thermometers. A complete list of compatible portable meters can be found below.

Hanna

MX-11593

HI70031G is a premium quality 1413 µS/cm conductivity solution standardized with a conductivity meter that has been calibrated with potassium chloride NIST 2202 SRM (Standard Reference Material) in deionized water for analytical use in accordance with ISO 3696/BS3978.

Hanna

MX-11592

HI7031-012 is a premium quality 1,413 µS/cm conductivity solution standardized with a conductivity meter that has been calibrated with potassium chloride NIST 2202 SRM (Standard Reference Material) in deionized water for analytical use in accordance with ISO 3696/BS3978.

Hanna

MX-11591

HI7031-023 is a premium quality 1,413 µS/cm conductivity solution standardized with a conductivity meter that has been calibrated with potassium chloride NIST 2202 SRM (Standard Reference Material) in deionized water for analytical use in accordance with ISO 3696/BS3978.

Hanna

MX-11596

HI70039G is a premium quality 5000 µS/cm conductivity solution standardized with a conductivity meter that has been calibrated with potassium chloride NIST 2202 SRM (Standard Reference Material) in deionized water for analytical use in accordance with ISO 3696/BS3978.

Hanna

MX-11595

HI7039-012 is a premium quality 5,000 µS/cm conductivity solution standardized with a conductivity meter that has been calibrated with potassium chloride NIST 2202 SRM (Standard Reference Material) in deionized water for analytical use in accordance with ISO 3696/BS3978.

Hanna

MX-11594

HI7039-023 is a premium quality 5,000 µS/cm conductivity solution standardized with a conductivity meter that has been calibrated with potassium chloride NIST 2202 SRM (Standard Reference Material) in deionized water for analytical use in accordance with ISO 3696/BS3978.

Hanna

MX-11604

• pH Range: 0.00 to 14.00 pH
• pH Resolution: 0.01 pH

Hanna

MX-11605

• pH Range: 0.00 to 14.00 pH
• pH Resolution: 0.01 pH

Hanna

MX-11606

• Temperature Range: -5.0 to 105°C (23.0 to 221.0°F)
• Temperature Resolution: 0.1°C (0.1°F)