Hanna

Hanna

MX-12989

Waterproof Protection - The HI7698194 probe features an IP68 rating for continuous immersion in water.

Hanna

MX-12988

This probe also incorporates a potential matching pin. The matching pin is considered the "earth groundin. connection and is used to prevent ground loop effects from causing erratic readings and damage to the system.

Hanna

MX-12990

• Sensor inputs: pH or pH/ORP EC/Turbidity Dissolved Oxygen
• Sample environment: Fresh, brackish, seawater

Hanna

MX-13008

Hanna's Smart Caps feature a built-in RFID reader that is able to store important data, including manufacture date and first-use date for increased traceabilty.

Hanna

MX-13009

A robust ABS body and stainless steel protective guard ensure durability when measuring in tough environments. With an IP68 rating, this probe is totally sealed against water and dust.

Hanna

MX-13011

Suitable for control applications in aeration basins, ponds, and tanks where optimizing oxygen transfer is a key element, the probe can be submersed/immersed in a tank using the 3/4" NPT threads, or installed in a flow cell using the lower sensor threads.

Hanna

MX-13012

• Measurement unit: % saturation mg/L
• Measure range: 0.0 to 500.0 % saturation 0.00 to 50.00 mg/L

Hanna

MX-13014

The probe features a flat tip (ideal for solutions containing aggressive chemicals) which virtually eliminates dirt deposits and significantly reduces maintenance.

Hanna

MX-11743

• Description: ORP electrode
• Reference: double, Ag/AgCl

Hanna

MX-11744

• Description: ORP electrode
• Reference: double, Ag/AgCl

Hanna

MX-11745

• Description: ORP electrode
• Reference: double, Ag/AgCl

Hanna

MX-13017

• Junction Flow Rate: Ceramic, single
• Electrolyte: Gel

Hanna

MX-13020

Genuine Hanna Overhead Electrode Holder.

Hanna

MX-11691

• Description: combination pH electrode
• Reference: single, Hg/Hg2Cl2

Hanna

MX-11723

• Description: pH half-cell
• Half Cell: –

Hanna

MX-12420

• Recommended Operating Temperature: 900°C (1650°F)
• Response Time (90% of final value): 10 seconds

Hanna

MX-13047

• Description: pH and Temperature Industrial Smart Probe
• Range: pH: 0.00 to 12.00 pH

Hanna

MX-11486

The electrolyte level in refillable electrodes should be checked before performing any measurement. If the level is low, refill with the proper electrolyte solution to ensure the correct electrode performance.

Hanna

MX-11504

• Reference: single, Ag/AgCl
• Junction / Flow Rate: cloth

Hanna

MX-13061

• Description: pH electrode
• Reference: single, Ag/AgCl

Hanna

MX-13063

• Description: pre-amplified pH / temperature probe
• Reference: single

Hanna

MX-13062

• Reference: single
• Junction / Flow Rate: open

Hanna

MX-13064

• Description: pH electrode
• Reference: single, Ag/AgCl

Hanna

MX-11505

• Reference: single, Ag/AgCl
• Junction / Flow Rate: ceramic, triple / 40 - 50 µL/h

Hanna

MX-13066

• Description: pH electrode
• Reference: single, Ag/AgCl

Hanna

MX-13067

• Description: pH electrode
• Reference: single, Ag/AgCl

Hanna

MX-13068

• Junction / Flow Rate: single ceramic
• Electrolyte: gel

Hanna

MX-13069

• Description: refillable, combination pH electrode
• Reference: single, Ag/AgCl

Hanna

MX-13070

Remove the probe from the plastic storage tube/cap by unscrewing the top collar to vent the cap before removing. Save cap and collar for further probe storage.

Hanna

MX-13071

Remove the probe from the plastic storage tube/cap by unscrewing the top collar to vent the cap before removing. Save cap and collar for further probe storage.

Hanna

MX-13072

Remove the probe from the plastic storage tube/cap by unscrewing the top collar to vent the cap before removing. Save cap and collar for further probe storage.

Hanna

MX-13252

HI70300L is a specially formulated electrode storage solution that can be used to store your pH electrode*. To ensure the best response time, the sensor tip and the reference junction of the pH electrode should be kept moist when not in use.

Hanna

MX-11700

• Description: pH electrode
• Reference: single, Ag/AgCl

Hanna

MX-13074

• Description: pH electrode with CPS (Clogging Prevention System) with BNC + RCA Connector
• Reference: double, Ag/AgCl

Hanna

MX-11652

• Description: pH electrode with CPS™ (Clogging Prevention System)
• Reference: double, Ag/AgCl

Hanna

MX-13075

• Description: pH electrode with CPS™ (Clogging Prevention System)
• Reference: double, Ag/AgCl

Hanna

MX-13076

• Measurement Range: pH=0 to 12
• Reference Cell Type: double, Ag/AgCl

Hanna

MX-13077

• Reference: double, Ag/AgCl
• Junction / Flow Rate: moveable open junction

Hanna

MX-11657

• Description: refillable, combination pH electrode w/ conical tip
• Reference: double, Ag/AgCl

Hanna

MX-11655

• Description: refillable, combination pH electrode w/ conical tip
• Reference: double, Ag/AgCl

Hanna

MX-11178

• Description: pH electrode with CPS™ (Clogging Prevention System)
• Reference: double, Ag/AgCl

Hanna

MX-12982

• Description: combination pH electrode w/micro bulb for small samples
• Reference: double, Ag/AgCl

Hanna

MX-13096

• Reference: Single, Ag/AgCl
• Junction: Cloth

Hanna

MX-13097

• Reference: Single, Ag/AgCl
• Junction: Cloth

Hanna

MX-11677

• Description: pre-amplified pH and EC probe
• Reference: single, Ag/AgCl

Hanna

MX-11676

• Description: pre-amplified pH and EC probe
• Reference: single, Ag/AgCl

Hanna

MX-13058

• Reference: single, Ag/AgCl
• Junction / Flow Rate: cloth

Hanna

MX-13060

Hanna Instruments offers a wide variety of electrodes that are designed for many different applications. The sensing material, body material, and connection type used are just some of the design considerations.