All products

Hanna

MX-12206

TDS (total dissolved solids ) solution 1500 mg / L (ppm ) for calibration . Individual portions – and virtually always fresh & no contamination risk.

Hanna

MX-12218

• Range: 0.0 to 15.0 ppm
• Resolution: 0.1 ppm

Hanna

MX-12225

In many applications, electrodes become dirty while being used, with negative results on their efficiency. Since this dirt is not removed during normal use, special cleaning solutions are needed.

Hanna

MX-12246

The electrolyte level in refillable electrodes should be checked before performing any measurements. If the level is low, refill with the proper electrolyte solution to ensure the correct electrode performance. This simple maintenance helps guarantee the efficiency and precision of your refillable electrodes.

Hanna

MX-12249

The electrolyte level in refillable electrodes should be checked before performing any measurements. If the level is low, refill with the proper electrolyte solution to ensure the correct electrode performance. This simple maintenance helps guarantee the efficiency and precision of your refillable electrodes.

Hanna

MX-12255

Electrode filling solution

Hanna

MX-12267

The electrolyte level in refillable electrodes should be checked before performing any measurements. If the level is low, refill with the proper electrolyte solution to ensure the correct electrode performance. This simple maintenance helps guarantee the efficiency and precision of your refillable electrodes.

Hanna

MX-12288

ORP standard solutions allow you to test the precision of ORP electrodes. For example, by immersing the electrode in HI 7020 solution, you should read within the 200 to 275 mV range (@20°C/68°F). If the reading is outside the indicated interval, clean and condition your ORP electrode in HANNA® pretreatment solution.

Hanna

MX-12314

• Range: 0.00 to 7.00 g/L
• Resolution: 0.01 g/L

Hanna

MX-12315

• Range: 0 to 500 PCU
• Resolution: 5 PCU

Hanna

MX-12331

Cap for Photometer HI 967xx Serie (4 pcs)

Hanna

MX-12461

• Range: 0 to 500 ppm
• Resolution: 1 ppm

Hanna

MX-12614

The HANNA® turbidity calibration solutions are produced according to the AMCO AEPA-1 standards, at 0, 10, 20 and 500 FTU. They are preferred to the formazine based standards, as they are non-toxic, stable, reusable and long-lasting.

Hanna

MX-12634

Reagents for the photometric determination of ammonia in the range to 3.00 mg / L. Nessler method

Hanna

MX-12636

Powder reagent for free chlorine, DPD Method, 100 tests Range: 0.00 to 5.00 mg/L. Order Information: Powder reagent kit for 100 tests (free Cl 2 )

Hanna

MX-12639

Reagent for the photometric determination of copper in the range of up to 5.00mg / L. Bicinchoninate method.

Hanna

MX-12642

AMCO-EPA solution @ 0 FTU (30 mL) The HANNA® turbidity calibration solutions are produced according to the AMCO AEPA-1 standards, at 0, 10, 20 and 500 FTU. They are preferred to the formazine based standards, as they are non-toxic, stable, reusable and long-lasting. Order Information: AMCO-EPA solution @ 0 FTU (30 mL)

Hanna

MX-12650

Reagents for the photometric determination of hydrazine in the range up to 400 mg / L. p- dimethylaminobenzaldehyde method

Hanna

MX-12652

Reagents for the photometric determination of silicate in the range up to 2.00 mg / L. Heteropoly blue method.

Hanna

MX-12653

Reagents for the photometric determination of phosphorus in the range of up to 15.0 mg / L. Amino acid method.

Hanna

MX-12655

Reagent for the photometric determination of nitrite in the low range . Diazotization method

Hanna

MX-12657

Reagents for the photometric determination of nitrite in the range up to 150 mg / L. Ferrous sulfate method

Hanna

MX-12659

Reagents for the photometric determination of manganese in the range up to 20.0 mg / L. Periodate method.

Hanna

MX-12665

Reagent for the photometric determination of aluminum in the range to 1.00 mg / L. Aluminon method.

Hanna

MX-12667

Reagents for the photometric determination of phosphate in the range up to 2.50 mg / L. ascorbic acid method

Hanna

MX-12669

Reagents for the photometric determination of cyanide in the range up to 0200 mg / L. Pyridine- pyrazalone method.

Hanna

MX-12671

Reagents for the photometric determination of ammonia in the range up to 9.99 mg / L. Nessler method

Hanna

MX-12675

Reagents for the photometric determination of phosphate in the range of up to 30.0 mg / L. amino acid method

Hanna

MX-12677

Reagents for the photometric determination of iodine in the range up to 12.5 mg / L. DPD method.

Hanna

MX-12679

Reagents for the photometric determination of magnesium hardness in the range up to 2:00 mg / L. EDTA method.

Hanna

MX-12681

Reagents for the photometric determination of calcium hardness in the range up to 2.70 mg / L. Calagmit method.

Hanna

MX-12683

Reagents for the photometric determination of iron in the range to 5.00 mg / L. Phenanthroline method.

Hanna

MX-12685

Reagent for the photometric determination of cyanuric acid . Turbidimetric method.

Hanna

MX-12687

Reagent for the photometric determination of chromium VI in the range up to 1000 micrograms / L. Diphenylcarbohydrazid method.

Hanna

MX-12689

Reagent for the photometric determination of nickel in the range up to 7.00 mg / L.

Hanna

MX-12691

Reagents for the photometric determination of nitrate in the range of up to 30.0 mg / L. Cadmium reduction method .

Hanna

MX-12695

Reagents for the photometric determination of molybdenum in the range up to 40.0 mg / L. Merkaptoessigsäre method.

Hanna

MX-12697

Reagents for the photometric determination of zinc in the range of up to 3.00 mg / L. Zircon method.

Hanna

MX-12699

Reagents for the photometric determination of dissolved oxygen in the range 10:00 to mg / L. Winkler method.

Hanna

MX-12701

Reagents for the photometric determination of ammonia in the range up to 100 mg / L. Nessler method

Hanna

MX-12703

Reagent for the photometric determination of free chlorine and total high. DPD method.

Hanna

MX-12705

Reagent for the photometric determination of total hardness all ranges . Colorimetric method.

Hanna

MX-12706

Reagent for the photometric determination of total hardness in the low range up to 250mg / l Colorimetric method.

Hanna

MX-12707

Reagent for the photometric determination of total hardness in the middle 200mg / l to 500mg / l Colorimetric method.

Hanna

MX-12708

Reagent for the photometric determination of total hardness high in 400mg / l to 750mg / l Colorimetric method.

Hanna

MX-12712

Reagent for the photometric determination of chlorine dioxide in the field until 2:00 mg / L. Chlorophenol Red method.

Hanna

MX-12714

Reagent for the photometric determination of fluoride in the range up to 20.00 mg / L. SPADNS method

Hanna

MX-12716

Reagents for the photometric determination of nickel in the range up to 1.000 mg / L. PAN method.