All products

Bioline

MX-13697

The ISOLATE II RNA Mini Kit provides a simple, efficient column-based method for the isolation of total RNA from a wide variety of starting materials, without the need for hazardous reagents such as phenol.

Bioline

MX-13698

The ISOLATE II RNA Plant Kit provides a simple, efficient column-based method for the isolation of total RNA from a wide variety of plant materials, including leaves, bark, roots and fruits, without the need for hazardous reagents such as phenol.

Bioline

MX-13696

The ISOLATE II RNA/DNA/Protein Kit provides a simple, efficient column-based method for the sequential isolation of total RNA, genomic DNA and proteins from a wide variety of starting materials, without the need for hazardous reagents such as phenol.

Duran

MX-10064

DURAN® Original GL laboratory bottles have become the gold standard of multifunctional laboratory bottles since their introduction in 1972.

Duran

MX-10063

DURAN® Original GL laboratory bottles have become the gold standard of multifunctional laboratory bottles since their introduction in 1972.

Duran

MX-10836

A wide-mouth chemical storage bottle with a blue screw cap; inside the cap is a pouring ring that prevents chemicals from spilling or leaking. It is typically used for relatively pure chemicals employed in precise quantitative analysis.

Parafilm-M

MX-11133

Size 4 x 125 FT.

Tarsons

MX-13704

Large Wide Mouth Round Bottle for Storage, packing and shipping

Tarsons

MX-13705

Large Wide Mouth Round Bottle for Storage, packing and shipping

Dura

MX-10895

For transferring water or saline, and also effective as a protective sleeve against scratches; Matte, flesh-coloured surface with very good flexibility

Merck

MX-11144

Lauryl sulfate broth (LSB) is widely used to detect coliform bacteria in wastewater, dairy products, other food products and clinical samples. It is a cream-yellow, homogeneous, free-flowing powder that dissolves readily in water at 25 °C, pH 6.8 ± 2.

Difco

MX-11125

Pack size 500 g. Bacto™ Tryptone is used in preparing microbiological culture media. Ingredients, where noted, meet United States Pharmacopeia (USP) performance specifications.

Precision Laboratories

MX-10071

Litmus paper for testing the acidity-basicity of solutions, packed in a good plastic box, 100 sheets/set, 0.6 cm wide paper strip, 4.7 cm long.

Hanna

MX-12739

The HI93754D-25 COD kit contains 25 ready-to-use vials containing pre-measured reagents. These high quality reagents follow the mercury-free dichromate method for determination of COD. In this method, a heated digestion is required to oxidize organic matter in the sample.

Mira

MX-10899

Luer-lock glass syringe (needle not included).

BRAND

MX-10848

Plastic cuvette made of polystyrene (Polystyrene); 2.5 ml; Pack size 100 pieces per box; For use with a Spectrophotometer at wavelengths of 340 to 900 nm

Bioer

MX-13722

Bioer

MX-13723

Bioer

MX-13725

Bioer

MX-13727

Hanna

MX-12680

The HI93719-03 are high quality reagents that are pre-measured, allowing for users to achieve fast and accurate colorimetric measurements. These reagents follow adaptation of the Standard Methods for the Examination of Water and Wastewater, 18th ed., colorimetric method.

Hanna

MX-12307

The HI719-25 are high-quality reagents that are pre-measured, allowing for users to achieve fast and accurate measurements with their Magnesium Hardness Checker® HC. These reagents follow the EDTA colorimetric method in which the reaction between magnesium and the reagent causes a violet tint in the sample.

Hanna

MX-12731

The HI937520-03 are high quality reagents that are pre-measured, allowing for users to achieve fast and accurate colorimetric measurements. These reagents follow an adaptation of the calmagite method. The reaction between magnesium and reagents causes a red tint in the sample.

Merck

MX-11140

Magnesium sulfate heptahydrate for analysis, EMSURE grade, with both quantity and quality controlled and reported parameters meeting ACS, ISO and/or Reag. Ph Eur standards, giving customers confidence in the quality of the product.

DLAB

MX-10072

Used with Magnetic Stirrer or Hotplate and Magnetic Stirrer.

Tarsons

MX-13728

ABS plastic construction is scratch resistant and easily cleaned

Merck

MX-11147

Malt extract adds a source of nitrogen and carbohydrate to culture media for cultivating yeasts and moulds, and is also used in vitamin assays.

Hanna

MX-12283

HI709-11 is a high-quality set of calibration standards that allows users to validate the Manganese High Range Checker HC - HI709. The HI709-11 includes one sealed cuvette for zero ppm manganese and one cuvette that is tinted to an equivalent 10.0 ± 0.5 ppm manganese sample @ 25°C.

Hanna

MX-12284

The HI709-25 are high-quality reagents that are pre-measured, allowing for users to achieve fast and accurate measurements with their Manganese High Range Checker® HC. These reagents follow the Periodate method in which the reaction between manganese and the reagents causes a pink tint in the sample.

Hanna

MX-12660

The HI93709-03 are high quality reagents that are pre-measured, allowing for users to achieve fast and accurate colorimetric measurements. The method is an adaptation of the Standard Methods for the Examination of Water and Wastewater, 18th edition, periodate method.

Hanna

MX-12721

The HI93748-03 are high quality reagents that are pre-measured, allowing for users to achieve fast and accurate colorimetric measurements. The method is an adaptation of the 1-(2-pyridylazo)-2-naphthol (PAN) method. The reaction between manganese and the reagents causes an orange tint in the sample.

Hanna

MX-12974

HI759-11 is a high quality set of reference standards that allows users to calibrate the HI759 Maple Syrup Digital Grader. The HI759-11 includes two reference cuvettes with a value of 0% transmittance.

Tarsons

MX-13729

Can withstand an RCF of 20,000xG. Certified Dnase ,Rnase and Pyrogen free

Tarsons

MX-13730

Can withstand an RCF of 20,000xG. Certified Dnase ,Rnase and Pyrogen free

RCI-Labscan

MX-11118

Methanol, also known as methyl alcohol, is a non-potable alcohol widely used as an industrial solvent, for example for cleaning plastics, in adhesives for plywood and as a component of biodiesel. It is also a main raw material for producing formaldehyde, a solvent used in paints and polishes.

Tarsons

MX-13740

Can withstand an RCF of 20,000xG. Certified Dnase ,Rnase and Pyrogen free

Tarsons

MX-13741

Can withstand an RCF of 20,000xG. Certified Dnase ,Rnase and Pyrogen free

Tarsons

MX-13742

Tarsons

MX-13743

Hycon

MX-10877

A 10 microlitre tip, natural white (the natural colour of the plastic); Made of polypropylene (Polypropylene); Autoclavable; 1000 pieces per bag

Axygen

MX-10834

Tips made of Polypropylene (PP) plastic, Certified RNase, DNase, and endotoxin free; Supplied in a PP box with internal tip slots; 96 tips per box; Can be autoclaved at 120 °C for 20 minutes

Tarsons

MX-13744

Can withstand a wide range of temperature

Axygen

MX-10797

Made of virgin polypropylene; Autoclavable; Heat resistant up to 121 °C and cold resistant down to -80 °C; Withstands centrifugal force up to 16,000 g; Supplied in a zip-lock bag

Hycon

MX-10872

Made of virgin polypropylene; Autoclavable; Heat resistant up to 121 °C; Withstands cold down to -80 °C; Withstands centrifugal force up to 16,000 g; Supplied in a zip-lock bag, pack size 1,000 pieces

Axygen

MX-10798

Made of virgin polypropylene; Autoclavable; Heat resistant up to 121 °C and cold resistant down to -80 °C; Withstands centrifugal force up to 14,000 g; Supplied in a zip-lock bag; Pack size 500 pieces

Hanna

MX-12696

The HI93730-03 are high quality reagents that are pre-measured, allowing for users to achieve fast and accurate colorimetric measurements. The method is an adaptation of the mercaptoacetic acid method. The reaction between molybdenum and the reagents causes a yellow tint in the sample.

Bioline

MX-13819

MyFi™ has been developed to give reliable amplification of targets up to 10 kb from challenging and complex targets, even in the presence of PCR inhibitors. MyFi is therefore ideal for amplification of cDNA libraries, complex genomic fragments and GC-rich targets.

Bioline

MX-13820

MyTaq™ DNA Polymerase is recommended for all standard PCR applications. The MyTaq DNA Polymerase and MyTaq Reaction Buffer in this product, are a unique combination of next-generation polymerase and novel buffer system that deliver very high yield PCR amplification over a wide range of PCR templates.