All products

MX-11006

Made from medium-weight Comtwill fabric that blends natural fibres with synthetic polyester, similar to Toray, but with a fine weave that does not attract dust. Suitable for laboratories, hospitals and industrial factories.

MX-11086

The mortar and pestle come in several sizes - small, medium and large - chosen to suit the medicine being prepared

MX-11070

Boss head with a steel ring for use with a base and stand set. Serves as a support for a separatory funnel in separation experiments, and as a stand for heating solutions or igniting substances with the flame of an alcohol burner or Bunsen burner. One end is a metal ring, the other a boss head that clamps to the stand and locks with a screw; fits stands of many sizes.

2 variants: 150mm / 6 · 230mm / 9

A small glass tube; Used for drawing and dispensing chemicals; Fine, tapered, long dropper tip, used with a rubber bulb; Length 150 mm, or 6 inches; Pack size 250 pieces per box

MX-11058

Commonly used equipment in general laboratories (for Petri dishes); Made of good-quality stainless steel; Strong and durable, does not harbour germs; Easy to clean

MX-11015

pH paper test is paper for measuring the acidity or alkalinity of liquids, with a colour chart for comparing pH values; it can be used in place of litmus paper and is convenient and easy to use. pH paper is available for different applications, such as wastewater, industrial water, agriculture, soil quality, the environment and wastewater treatment.

MX-11084

Porcelain crucible for heating, igniting or melting substances at high temperature to determine their composition or chemical properties

MX-10861

Pycnometer, also called a Specific gravity bottle, made of glass (Borosilicate 3.3); An instrument used to determine the density of liquids

MX-10859

Cuvette for spectrophotometers; Quartz cuvette for UV-Vis; Suitable for spectrophotometric measurement; A small clear rectangular vessel, sold in a range of materials, quality grades and sizes

MX-10961

Used to stopper scientific glassware such as test tubes and flasks.

MX-10952

Made from extra-tough HDPE resin

MX-10948

Replacement wire for an inoculating loop with a detachable handle.

MX-10958

For use with dropper tubes or Pasteur pipettes; For drawing and dispensing solutions and chemicals; Made of rubber, chemical resistant and acid- and alkali-resistant, firm in feel

MX-11065

Size 500 g.

MX-11007

Made from medium-weight Comtwill fabric that blends natural fibres with synthetic polyester, similar to Toray, but with a fine weave that does not attract dust. Suitable for laboratories, hospitals and industrial factories.

MX-11059

• Length: 20 cm
• Spoon volume: 15 ml

MX-10841

Used to determine the specific gravity of liquids, or of solids in powder form or that can be ground to a powder; an instrument for finding the density of liquids. Most are made from borosilicate 3.3 glass with a glass stopper on top.

MX-10843

Hellendhal-type glass staining jar, a vertical jar for staining slides with a glass lid, made of thick high-quality glass. It has 8 slots and holds 8 slides. Compatible with all standard commercial slides measuring 1x3 inches (75x25 mm) with a thickness of 0.8-1.2 mm.

MX-11045

• Volume: 200 / 500 / 1,000 / 3,000 ml

MX-11068

Wooden-clamp test tube holder, suitable for test tubes 1.5 - 3 cm in diameter. Used to hold hot test tubes, glass rods and thermometers for the operator's safety. One end of the holder has a metal rod for mounting on a boss head or connector and stand to set up apparatus for scientific experiments, or for use when boiling solutions.

MX-10903

For oral examination; Made of wood; Free of splinters and knots; Cut and sanded to smooth edges; Clean and kiln-dried to prevent mould; Pack size 100 pieces/box

MX-10956

A soft, flexible red rubber bulb with a small opening at one end that draws mucus into the bulb at the other end. Commonly used to suction phlegm and nasal mucus in small children, as the gentle suction does not irritate the mucous membrane.

MX-10946

For cleaning test tubes, burettes and other glassware such as measuring cylinders and small beakers in the science laboratory after use

MX-11074

A triangle, or wire triangle, supports a crucible while it is heated over a Bunsen burner or other heating device so that the crucible is in direct contact with the heat. (Choose a triangle whose opening fits the base of the crucible.)

MX-10840

A spreader for spreading substances or inoculum on culture plates and for streaking cultures on nutrient agar, used in science laboratories and biology work; 7 inches long.

MX-10906

96 sample wells; For microbiological analysis and cell culture work; U-shaped bottom

MX-10905

96 sample wells; For microbiological analysis and cell culture work; V-shaped bottom

MX-10888

Made-to-order item, 15-30 day lead time. Purple-cap blood collection tube containing EDTA as anticoagulant.

MX-10889

Made-to-order item, 15-30 day lead time. Blood collection tube (red cap), suitable for immunology and clinical testing.

MX-10822

A watch glass is used to cover a beaker or other apparatus, to keep other substances or dust from falling into the solution in the beaker and to prevent solution from splashing out of the beaker during experiments such as boiling

MX-10869

Low form weighing bottle with a clear lid, made of glass, used to hold solid or powdered chemicals for weighing on a balance, since it protects the balance from the chemicals and stops the substance from scattering. A weighing bottle is a piece of glassware used in chemistry laboratories and science classrooms.

MX-10868

Tall form weighing bottle with a clear lid, made of glass, used to hold solid or powdered chemicals for weighing on a balance, since it protects the balance from the chemicals and stops the substance from scattering. A weighing bottle is a piece of glassware used in chemistry laboratories and science classrooms. Size: 3 cm wide, 5 cm high, excluding the lid.

Bioer

MX-13378

Hanna

MX-11209

Biolin Scientific

MX-14236

Biolin Scientific

MX-14237

Bioer

MX-13457

Bioer

MX-13458

Bioer

MX-13460

Bioer

MX-13461

Borer Chemie AG

MX-14242

Borer Chemie AG

MX-14243

Borer Chemie AG

MX-14244

Borer Chemie AG

MX-14245

Borer Chemie AG

MX-14246

AMETEK Brookfield

MX-14249

AMETEK Brookfield

MX-14282

AMETEK Brookfield

MX-14283